Table of Contents
Multicab owners and fleet suppliers looking for a one-stop lighting refresh will find both ends of the truck covered here: a 2 pc head lamp set (left and right) and a 2 pc rear light set (left and right), drawn for the 2014-present Suzuki Multicab range in the Philippines.
Head lamp set: 2 pc, one left and one right rectangular halogen unit
Rear light set: 2 pc, one left and one right red-and-amber combination lens
Each product is packed and priced as its own 2 pc set, so fleets can order front and rear in one inquiry
The Multicab descends from the tenth-generation Suzuki Carry truck (DA52/DB52 platform), assembled and sold locally in the Philippines under names such as Norkis Multicab and Suzuki Transformer
It is not the same truck as the current Japan-market Carry DA16T released in 2013: the DA16T front end takes different lamps
Buyers searching by chassis plate should check for the DA52/DB52-series codes rather than DA16T
Serves utility fleets, tricycle operators and cargo haulers that keep Multicabs on the road daily
Halogen layout keeps replacements cheap: one H4 bulb per head lamp, standard wedge bulbs at the rear
Head lamps plug into the original socket for a minutes-long swap; the rear lights arrive as pre-wired units with plug connectors, so check the plug against your truck's harness before ordering
Both products follow the stock halogen layout of the Multicab lighting system. Specifications below are split by product.
Type: rectangular halogen head lamp, left and right units
Bulb: H4 dual-filament halogen, 12V 60/55W, the standard factory bulb type listed for Carry/Every trucks of this platform family
Clear prism lens with internal reflector flutes for beam control
Mounts at the stock panel positions, plugs into the original socket
Type: red-and-amber combination lens, left and right units
Sections: stop and tail in red, turn signal in amber, matching the stock Multicab lens layout
Wiring: each lamp leaves the factory as a pre-wired unit, bulb holders seated in the housing with leads exiting through sealed grommets and ending in plug connectors
Plug colours and lead count may differ between supply batches, so compare the connector photo against your truck's harness before ordering
Mounts at the stock cargo-bed panel positions
12V system across both products
No LED conversion modules, so flasher behaviour stays identical to stock
Housing material: automotive-grade plastic throughout
Both sets are drawn for the 2014-present Suzuki Multicab range sold in the Philippines, which carries the tenth-generation Carry truck platform. Fitment notes and part number references are split below.
Suzuki Multicab (Philippine market), 2014-present, truck configuration
Platform family: tenth-generation Suzuki Carry (DA52/DB52 series)
Not for the Japan-market Carry DA16T or DA63T of the same badge family
Aftermarket replacements for this tail lamp cite Suzuki part numbers 35603-79001, 35603-79002 and 35603-79004 (right side) and 35604-79001, 35604-79002 and 35604-79004 (left side), covering Carry trucks including the DA52T
A genuine Suzuki rear combination lens, 35652-79001, is listed for Carry and Every models of the same platform family
Treat these numbers as cross-check references from aftermarket and genuine-part listings, not a fitment guarantee
Used-parts records show the DA52-series head lamp as a KOITO-made halogen unit, confirming the H4 bulb layout
A verified genuine head lamp number for the DA52 platform did not surface in public aftermarket listings, so match by shape and photo instead of number
Do not buy by numbers starting 35121 without checking: those codes belong to Maruti Suzuki passenger models, not this truck
Send a photo of your current head lamp and rear lens with the listing photos side by side
For the rear lights, also photograph the connector plug and lead exit on your current lamp: the supplied units are pre-wired with plug connectors, and the plug style must match or be adaptable to your harness
Note your steering side: Philippine roads keep to the right, while many Multicabs keep right-hand-drive layouts from their Japanese donor trucks, so confirm the beam pattern you need
Fleet buyers: state vehicle count per branch for consolidated packing
Is this one product or two?
Two, packed separately: a 2 pc head lamp set (left and right) and a 2 pc rear light set (left and right). Order one set per product per vehicle. Fleet buyers can take both sets in a single inquiry and shipment.
Will these fit a Suzuki Carry?
Only the Philippine-market Multicab line, which carries the tenth-generation Carry (DA52/DB52) platform. The current Japan-market Carry DA16T, released in 2013, takes different front-end lamps and is not covered. If your plate shows a DA16T code, this set is not the right part.
What bulbs do the lamps use?
The head lamps take one H4 dual-filament halogen bulb each (12V 60/55W), the standard bulb type listed for this platform family. The rear lenses take standard wedge bulbs; the exact bulb count per lens varies by supply batch, so confirm the packing list at quotation.
My truck is right-hand drive but Philippine roads keep right. Which head lamp do I need?
This is a common Multicab situation, since many units keep the right-hand-drive layout of their Japanese donor trucks. Beam patterns differ between left- and right-hand-traffic lamps, so confirm the pattern your unit currently runs before ordering, or send photos of the lamp face for us to check.
Jaecoo is Chery's SUV brand built only for overseas buyers. This piece examines why it was created, how its J5–J8 models carry the "elegant off-road" idea, and what its UK and Southeast Asia sales truly show. It covers the "Temu Range Rover" joke, the SHS hybrid that suits weak charging networks, and a clear-eyed verdict: Jaecoo has proved it can get hot — but not yet that it can stay.