TIP: Search results will list the matched SKUs.

About Autobridge™ » Car Accessories Range » Car Brands » Cadillac » XT5 » Car Mud Flaps for 2017-2020 Cadillac XT5 | C1XX Platform | FWD & AWD Compatible

Back to list

Share to:

Car Mud Flaps for 2017-2020 Cadillac XT5 | C1XX Platform | FWD & AWD Compatible

Sale Specification

{"json":"[{\"index\":\"0\",\"tran_label\":\"Color\",\"tran_value\":[\"Black\"]},{\"index\":\"1\",\"tran_label\":\"Product Sizes\",\"tran_value\":[\"Front wheel: 230*215mm\",\"Rear wheel: 245*285mm\"]},{\"index\":\"2\",\"tran_label\":\"Number of Sets\",\"tran_value\":[\"4 PCS\"]},{\"index\":\"3\",\"tran_label\":\"Fastener Ready\",\"tran_value\":[\"Yes\"]},{\"index\":\"4\",\"tran_label\":\"Material\",\"tran_value\":[\"PP soft plastic\"]}]","type":"2"}

Product Details

Table of Contents

Application

Cadillac XT5 1st Generation (2017-2020)

The Cadillac XT5 debuted in 2016 as a 2017 model year vehicle, replacing the SRX as Cadillac's entry-level crossover SUV and launching the brand's new XT naming convention (XT4, XT5, XT6). Built on GM's C1XX unibody platform, the XT5 is assembled at Spring Hill, Tennessee (USA) and Shanghai (China, SAIC-GM joint venture), serving both North American and Chinese domestic markets as well as global export channels.

This mud flap set fits all pre-facelift 2017-2020 XT5 models with either the 3.6L V6 LGX engine (North America, 310 hp) or the 2.0L Turbo LTG engine (China, 261 hp). Front and rear mud flaps are compatible across all trim grades (Standard, Luxury, Premium Luxury, Platinum) and both FWD and AWD drivetrains, as pre-facelift bumper and wheel arch contours are identical across the lineup.

Product Overview

Material Options

PP (Standard): High-elasticity polypropylene, impact-resistant, factory black finish, default production option
PP+TPE (Mid-grade): PP base with TPE over-molded edges for improved flexibility at low temperatures
TPE (Premium): Full thermoplastic elastomer construction, superior cold-weather flexibility and scratch recovery
ABS (Rigid): Acrylonitrile butadiene styrene, higher surface hardness with glossier finish, available on request

Product Specifications

Front Pair: 230 × 215 mm per piece
Rear Pair: 245 × 285 mm per piece
Set Contents: 4 pieces (front left, front right, rear left, rear right)
Color: Black (standard), custom color on request

Fastener Kit (Included)

Plastic fender fastener clips (push-type, reusable)
U-clip screws (metal, corrosion-resistant coating)
Allen screws with hex key (stainless steel)

Installation Method

Tool-less clip-on installation using factory wheel arch mounting points. No drilling required for standard configuration; pre-existing fender liner holes and plastic clip positions are reused. U-clip and Allen screws provide additional anchoring at the lower bumper edge for AWD models with wider wheel arch trims.

Fitment

Cadillac XT5 (C1XX, Pre-Facelift), 2017-2020

Market	Engine	Drivetrain	Trim Levels	Compatibility
USA / Canada	3.6L V6 LGX (310 hp)	FWD, AWD	Standard, Luxury, Premium Luxury, Platinum	Direct fit
China (SAIC-GM)	2.0L Turbo LTG (261 hp)	FWD, AWD	技术型, 豪华型, 领先型, 铂金型	Direct fit
Middle East (GCC)	3.6L V6 LGX (310 hp)	AWD	Luxury, Premium Luxury	Direct fit
Korea / Other Asia	3.6L V6 LGX (310 hp)	AWD	Luxury, Premium Luxury	Direct fit

Excluded Models

2021+ XT5 Facelift (Mid-cycle Refresh): Front and rear bumper contours revised, different mud flap geometry required, verify separately
Cadillac SRX (2010-2016): Predecessor on GM Theta Premium platform, completely different wheel arch and bumper design
Cadillac XT4 / XT6: Different vehicle segments with distinct wheel arch dimensions
GMC Acadia / Chevrolet Blazer (C1XX): Platform siblings but independent body stampings, mud flap geometry differs

Installation & OEM Compatibility

Installation Guidance

These mud flaps are designed as aftermarket accessories for the 2017-2020 Cadillac XT5. Installation uses factory wheel arch clip positions, no cutting or permanent modification required. Front mud flaps install with push-type plastic clips at the fender liner edge; rear mud flaps use a combination of plastic clips and U-clip screws at the rear bumper lower valence. AWD models with wider wheel arch trims should use the included Allen screws for additional lower-edge anchoring.

OEM-Style Compatibility

While these are aftermarket parts (not GM OEM accessories), the contour and mounting point layout is designed to match OEM Cadillac accessory mud flaps for the pre-facelift XT5. This ensures a factory-appearance fit with no visible gaps between the mud flap edge and the painted bumper surface. Custom logo or branding can be added during production per buyer specification.

Packaging & Export

Standard export packaging with individual polybag wrapping per piece. Full set includes 4 mud flaps, fastener kit, and installation diagram. Pallet quantity and custom retail packaging confirmed at quotation stage.

OEM Options

{"json":"[{\"index\":\"1\",\"tran_label\":\"Color\",\"tran_value\":[\"Black\",\"Paints\"]},{\"index\":\"2\",\"tran_label\":\"Install Fasteners\",\"tran_value\":[\"Plastic Fender Fastener Clips\",\"U Clip Screw\",\"Allen Screw with Hex key\"]},{\"index\":\"3\",\"tran_label\":\"Material\",\"tran_value\":[\"PP\",\"PP+TPE\",\"TPE\",\"ABS\"]}]","type":"2"}

Exploring Daihatsu's Commercial Vehicle Duo: The Generational Lineage and History of Hijet and Gran Max

The Hijet and the Gran Max—one is the ultimate space-saving product under Japan's micro commercial vehicle regulations, and the other is a globalized model that broke free from those constraints to reach the pinnacle of practicality. Whether navigating narrow Tokyo alleys or driving across the vast Southeast Asian market, they demonstrate Daihatsu's "compact cars, big impact" philosophy through solid quality and continuous generational inheritance.