2007–2014 Daihatsu Hijet S211P Work Truck Lighting Set Front Light Tail Light Side Mirrors

OE Reference

OE Cross‑Reference Disclaimer

The OE and cross‑reference numbers listed on this page are provided for reference and identification purposes only. They are used to help match our replacement parts to the corresponding original equipment applications and do not imply that the products are genuine OEM items, supplied by or endorsed by the vehicle manufacturer. Customers must confirm fitment by checking vehicle details, dimensions and specifications before ordering; AUTOBRIDGE™ (Xiamen) Vehicle Parts Supply is not responsible for losses caused by incorrect use of OE or cross‑reference information.

Headlight

Unfortunately, I couldn't find exploded views of the Daihatsu Hijet S211P's accessories. The known E/O part numbers are:

Hijet S211P series:
- right side: 81110-B5050
- left side: 81150-B5050

Taillight

Unfortunately, I couldn't find exploded views of the Daihatsu Hijet S100's accessories. The known E/O part numbers are:

Hijet S211P series:
- right side: 81550-B5140
- left side: 81560-B5140

Side Mirror Assembly

Unfortunately, I couldn't find exploded views of the Daihatsu Hijet S100's accessories. The known E/O part numbers are:

Hijet S211P series:
- right side: 87910-B5071
- left side: 87940-B5120

Spec.

Head light spec.

Spec	Details
Light source	H4 halogen bulb single unit providing low beam and high beam dual filament base type P43t 9003 HB2 family
Rated voltage and wattage	12 V system with 60 W high beam and 55 W low beam 60 55 W to match factory harness capacity
Approx luminous flux	Around 1100 to 1650 lumens per side for OEM halogen depending on beam mode based on typical H4 performance
Color temperature	Warm white output about 3200 K suitable for rain and fog conditions
Thermal and electrical notes	Designed for 12 V halogen efficiency with sufficient heat dissipation in the reflector shell LED upgrades should keep similar beam focus to pass inspection

Taillight spec.

Spec	Details
Functions	Tail light brake light rear turn signal and reverse light combined in one housing
Voltage	12 V rear lighting circuit shared with license and high mount stop lamps
Bulb types	Typical layout uses dual filament bulb about 12 V 21 W 5 W for tail and brake plus single filament 12 V 21 W bulbs for indicator and reverse similar to P21 family practice
Photometric performance	Tail section tuned to meet minimum intensity around several candela while brake and indicator sections reach higher candela to remain visible in daylight following ECE style guidelines
Lens color and material	Red sections for tail and stop amber for indicator and clear for reverse using plastic lens resistant to UV and minor impacts
Thermal notes	Suitable for original halogen bulbs and for approved LED replacement bulbs that keep heat within safe limits for plastic housings

Side mirror assembly spec.

Spec	Details
Mirror glass	Flat glass on driver side and slightly convex glass on passenger side to balance distance judgement and wider field of view
Field of vision	Designed to cover side lanes and rear corners of the truck bed to reduce blind spots when changing lanes or backing near walls
Adjustment and folding	Manual adjust mirror head with fold away function allowing the housing to pivot about 90 degrees forwards or backwards to avoid damage in narrow streets and farm tracks
Housing material	Weather stabilised ABS plastic finished in textured black for UV and chemical resistance typical of fleet washing
Mounting	Two or three bolt mounting base with rubber style gasket to isolate vibration and reduce mirror shake at idle
Electrical features	Most S211P mirrors are non powered without heaters some higher trims or aftermarket units offer 12 V power adjust or integrated indicators which remain compatible with the same mounting footprint

Part Features

Features

Lighting set follows the confirmed S211P bulb and housing specifications so H4 12 V 60 55 W headlamps and matching rear lamp units can be replaced as a matched pair which helps fleets keep beam brightness and signalling consistent across trucks.
Headlights use multi reflector PC housings with warm white halogen output and RHD cut lines to balance beam distance width and glare control making night driving on mountain roads and rural routes safer while still allowing compliant LED upgrades for higher output when needed.
Taillamps and sturdy ABS side mirrors are built for everyday commercial abuse from loading yards plantations and urban deliveries with sealed housings and vibration isolated mounts so S211P trucks can stay road legal and easy to drive even after many years in service.

Detailed Description

This lighting set is aimed at 2007-2014 Daihatsu Hijet S211P trucks that are still working in farms construction sites and city delivery routes by pairing factory style 12 V H4 headlamps with matched rear lamps and durable side mirrors the kit lets workshops and owners refresh front and rear visibility in one job restore clear signalling for inspections and keep future LED or mirror upgrades simple because the housings retain original mounting and bulb standards widely supported in Southeast Asian markets.

Exploring Daihatsu's Commercial Vehicle Duo: The Generational Lineage and History of Hijet and Gran Max

The Hijet and the Gran Max—one is the ultimate space-saving product under Japan's micro commercial vehicle regulations, and the other is a globalized model that broke free from those constraints to reach the pinnacle of practicality. Whether navigating narrow Tokyo alleys or driving across the vast Southeast Asian market, they demonstrate Daihatsu's "compact cars, big impact" philosophy through solid quality and continuous generational inheritance.