Honda Accord Mud Flaps – 11th Gen (CY) Splash Guard Set for Mid-Size Sedan
The Honda Accord entered its 11th generation in 2023 (chassis code CY), carrying forward the nameplate's legacy as the best-selling D-segment sedan in history with over 25 million units sold globally. Redesigned with a cleaner, more mature exterior and a hybrid-first powertrain strategy, the CY Accord is sold in over 30 countries — from Honda's home market of Japan to the US, Canada, China, the UAE, Saudi Arabia, Thailand, and Australia. In China, it is also sold under the Dongfeng Honda brand as the Honda Inspire (英仕派), sharing the identical CY platform and wheel arch dimensions. AutoBridge supplies aftermarket mud flaps (also called mudguards, splash guards, or splash shields) precision-engineered to the 11th Gen Accord's specific wheel arch contour — a direct OEM-replacement alternative to Honda Genuine splash guard set P/N 08P00-30A-100.
Fitment Coverage
2023-Present Honda Accord 11th Gen (CY1/CY2) – Both 1.5L Turbo (192 hp) and 2.0L e:HEV Hybrid (204 hp combined) variants share identical wheel arch geometry; confirmed fitment for all trims (LX, Sport, EX, EX-L, Sport-L, Touring)
Honda Inspire (Dongfeng Honda, China) – The Accord's China-market twin sold via Dongfeng Honda's dealer network; same CY chassis platform, identical mud flap fitment
Why Accord Owners Choose Aftermarket Mud Flaps
The Accord CY is sold across diverse operating conditions: North American salt-belt highways in winter, Gulf region desert-edge roads with loose sand and gravel, and Southeast Asian tropical downpours on frequently flooded streets. In all three environments, stone chips and road-spray damage to lower sills and rocker panels are a persistent concern. Honda offers a factory splash guard set (P/N 08P00-30A-100) as a dealer-installed accessory, but pricing at Honda dealerships is prohibitive for fleet buyers ordering in volume. Aftermarket mud flaps from AutoBridge provide a cost-effective alternative with equivalent fitment quality. For taxi and corporate fleet operators across the Middle East and Southeast Asia who run Accord sedans in high-mileage duty cycles, a full 4-piece mud flap set represents a minor upfront cost that prevents costly paintwork repairs over the vehicle's service life. The Accord's 1862mm width and standard 17-19 inch wheel options generate significant road spray on wet highways — comprehensive splash protection is essential for maintaining resale value.
Material and Compatibility
AutoBridge offers multiple material grades to suit target-market conditions: PP (standard polypropylene, best cost-efficiency for volume orders), PP+TPE (enhanced low-temperature flexibility for Canadian and Northern US markets), and TPE (premium odorless option for EU-quality-conscious buyers). All options arrive with pre-drilled fastener holes matching the Accord CY's factory mounting positions. Installation requires no body modifications — the mud flaps mount directly to existing fender liner attachment points using the included hardware (plastic clips, U-clip screws, and Allen key). Material selection, packaging format, and order quantity are confirmed at the quotation stage based on your target market and distribution channel.
OEM Customization Options for Honda Accord (CY) Mud Flaps
AutoBridge offers full OEM customization for 11th Gen Honda Accord (CY) mud flaps to meet distributor and fleet buyer requirements worldwide. The Accord's global sales footprint — spanning North America, China, the Middle East, and Southeast Asia — means material and packaging requirements vary by region. All specifications below are confirmed at the quotation stage — contact us with your target market and volume requirements.
Installation Guide for Honda Accord CY
The Accord CY uses factory-drilled mounting points inside each wheel well — no drilling or body modification is required. Installation follows Honda's OEM procedure for splash guard kit 08P00-30A-100:
Front wheel wells: Turn the steering wheel to full lock to expose the inner fender liner. Align the pre-drilled mud flap with existing lower fender liner holes and the lower bumper edge. Secure with included plastic fender clips and U-clip screws — there are 3 mounting points per front mud flap on the Accord CY
Rear wheel wells: Access is tighter due to the sedan's lower ride height. A short Phillips screwdriver is recommended for clearance. Align with 2 factory bumper-edge holes and the inner liner attachment point
Material selection by climate: PP (standard) for temperate and hot-dry climates (US Sun Belt, Gulf region); PP+TPE for cold-climate markets where sub-zero flexibility matters (Canada, Northern US); TPE (premium) for European-quality-conscious markets or where odor-free material is a compliance requirement
Material Options
PP (Polypropylene) – Standard, most cost-effective for volume orders; good all-round weather resistance
PP+TPE – Enhanced flexibility, recommended for cold-climate markets (Canada, Northern US states, Russia where exported)
TPE (Thermoplastic Elastomer) – Premium, odorless, ideal for EU-spec and high-quality aftermarket distribution
ABS – Rigid, high-gloss finish; available on request for specialty orders
Color and Finish
Standard: Matte black (most popular for wholesale and fleet orders across all regions)
Available on custom request: Gloss black, textured finish
Packaging Options
Standard export packaging — individual polybag with SKU label, master carton for bulk shipment
Retail-ready blister card packaging — available for distributor and retail-channel buyers; confirmed at quotation stage
Neutral/white-label packaging — available for buyers requiring unbranded export packaging
Fastener Kit
Plastic Fender Fastener Clips — match Accord CY factory clip dimensions
U Clip Screws — for lower bumper-edge attachment points
Allen Screws with Hex key — for wheel well liner mounting points
All hardware is corrosion-resistant zinc-coated steel or stainless steel
