Jeep Cherokee Rain Guards | 3-Generation Fitment (2002-Present)

Application: Jeep Cherokee (2002-Present, 3 Generations)

The Jeep Cherokee nameplate covers three distinct generations from 2002 to present, each with unique door frame dimensions that require generation-specific visor tooling. This product family spans a major platform transition from truck-based SUVs (KJ/KK) to a Fiat-derived crossover (KL), making cross-generation compatibility impossible.

Generation Timeline

Nameplate History

The Cherokee nameplate was retired in North America after the XJ generation (2001). For the KJ (2002) and KK (2008) generations, Jeep marketed the vehicle as the "Liberty" in North America while retaining the "Cherokee" name in all other global markets. When the KL generation launched for the 2014 model year, Jeep restored the "Cherokee" nameplate worldwide, retiring the "Liberty" designation.

Both names refer to the same vehicle lineage. Door visors for the KJ and KK generations are labeled "Liberty" in North American catalogs and "Cherokee" in international catalogs, but the physical product is identical for each generation.

Platform Isolation Notice

Each generation uses a different platform with distinct door frame geometry. Door visors are NOT interchangeable between generations:

• KJ to KK: Different body stamping, different door frame curvature. KJ visors will not seat properly on KK doors and vice versa.

• KK to KL: Complete platform change from truck-based body-on-frame to unibody crossover (Fiat Compact U.S. Wide). Door frame dimensions, window channel profiles, and mounting surfaces are entirely different.

• KJ to KL: Two generations apart with no shared body components. No cross-compatibility.

Dodge Nitro (KK Platform Relative)

The Dodge Nitro (2007-2011) was built on the same KK platform as the Jeep Liberty KK and shared the Toledo North Assembly line. However, the Nitro has a unique body with different door frames, window profiles, and exterior trim. Door visors for the Cherokee/Liberty KK do NOT fit the Dodge Nitro despite the shared platform.

Production Status Note

The KL generation ended production at the Belvidere Assembly Plant on February 28, 2023. Jeep revived the Cherokee nameplate for a sixth generation (KM) in August 2025, built on the STLA Large Transverse platform. This product's fitment list covers KJ, KK, and KL only. KM compatibility has not been verified and should not be assumed.

Model Years vs Production Years

The page lists "2002-Present" based on model year availability across the three listed generations. The KJ was introduced in April 2001 as a 2002 model year vehicle. The KK ceased production in August 2012 but was sold as a 2013 model year in some markets. The KL launched in November 2013 as a 2014 model year vehicle. Buyers should match visors to their specific generation rather than relying solely on calendar year ranges.

Product Overview

These door visors are manufactured using injection molding and plastic uptake processes, offering material, design, color, and installation customization for wholesale buyers targeting the Jeep Cherokee across three generations.

Material Options

Design Styles

Color Options

Installation Methods

Manufacturing Process

Two molding processes are available, each with distinct cost and quality trade-offs:

• Injection Molding: Higher machining accuracy, controllable thickness of 2.0mm to 2.5mm. Preferred for precision-fit visors requiring tight tolerances against Jeep Cherokee door frames. Higher mold opening cost but superior surface finish and dimensional consistency.

• Plastic Uptake (Vacuum Forming): Lower mold opening cost, controllable thickness of 1.2mm to 1.8mm. Suitable for cost-sensitive wholesale orders. Visor widening is based on the specific car model to ensure adequate coverage of the Cherokee door window frame.

Protective Film

The protective film covering chrome or steel trim is available in transparent or blue. Color can be custom-built by the buyer to match branding requirements.

Fitment Guide: Jeep Cherokee (2002-Present)

Three-Generation Fitment Matrix

KJ Liberty (2002-2007) Trim Levels

• Sport (base, 2002-2007)

• Renegade (2002-2004, replaced by Latitude in 2007)

• Latitude (2007 only, replaced Renegade)

• Rocky Mountain Edition (2005 special edition)

• Limited (top trim, 2002-2007)

2005 facelift updated the front hood, grille, and exterior trim. Door frame dimensions remained unchanged across all trims and pre/post-facelift models. Door visors fit all KJ trims without differentiation.

KK Liberty (2008-2013) Trim Levels

• Sport (base)

• Limited (top trim)

• Renegade (2010+)

• Sky Slider option (power canvas roof, does not affect door frame)

Production ended August 16, 2012. Model year 2013 units were sold from remaining inventory in some markets. The closely related Dodge Nitro (2007-2011) shares the KK platform but has different body panels and door frames. Door visors for KK Liberty do NOT fit the Dodge Nitro.

KL Cherokee (2014-Present) Trim Levels

• Sport (base, 2014-2018)

• Latitude (mid, 2014-Present)

• Trailhawk (off-road focused, 2014-Present)

• Limited (top, 2014-Present)

• Latitude Lux (2021+)

• 80th Anniversary (2021 special edition)

• Overland (2020+, top trim in some markets)

• Trailhawk Elite (2021+)

2018 facelift updated front and rear styling. A 2.0L turbo engine was added alongside the existing 3.2L V6 and 2.4L I4. Door frame dimensions were unchanged across all trims and pre/post-facelift models.

Engine Variants (Do Not Affect Door Visor Fitment)

Engine selection does not affect door visor compatibility. All engine variants within each generation share identical door frames and window channels.

Production Status and "Present" Definition

The KL generation ended production at Belvidere Assembly Plant on February 28, 2023. The page designation "2014-Present" reflects the original product listing and model year availability. Jeep launched a sixth-generation Cherokee (KM) in August 2025 on the STLA Large Transverse platform, but this product has NOT been validated for KM fitment. Buyers targeting 2025+ KM models should contact AutoBridge for updated tooling availability.

Cross-Generation Compatibility Summary