The Toyota Crown Kluger (XU70) is the premium 7-seat SUV variant of the fourth-generation Highlander, launched in China in 2021 by GAC Toyota. Positioned above the standard Highlander, the Crown Kluger features a distinct front fascia, premium interior trims, and a hybrid-only powertrain in the Chinese domestic market. Export markets (Australia, New Zealand, Middle East) receive both hybrid and petrol variants under the "Crown Kluger" nameplate.
This mud flap set is thermoformed to the XU70's wheel arch geometry, covering both the pre-facelift (2021–2023) and the facelifted version (2024–present) where the front bumper lower valence changed. The flaps clear the 18-inch and 20-inch factory wheel designs without rubbing at full lock.
Buyer Profile
Fleet service providers operating Crown Kluger fleets in corporate or ride-hailing applications, seeking to protect paint from stone chips on gravel access roads.
Suburban commuters in regions with seasonal rain or unpaved driveways, prioritizing rear quarter panel paint preservation.
Export distributors supplying aftermarket accessories to SEA and Gulf markets where the Crown Kluger nameplate is gaining recognition alongside the standard Highlander.
Material Selection Guide
PP (Polypropylene) — Rigid: Best for distributors in regions with extreme summer heat (>40°C) where TPE may soften. Cold-resistant formulation available for markets with freezing winters.
TPE (Thermoplastic Elastomer) — Flexible: Recommended for markets with frequent curb contact (urban parking). The material absorbs impact without cracking and returns to shape.
ABS + matte coating: Offers a painted-finish appearance matching body color; requires additional curing time in production but commands higher retail margin.
Confirmed Fitment — Toyota Crown Kluger XU70 (2021-Present)
The following trims and model years are confirmed for this mud flap pattern. If your market uses a different local name for this model, verify by VIN prefix before bulk ordering.
Market | Model Name | Years | Powertrain | Wheel Size | Fitment Note |
China (GAC Toyota) | Crown Kluger (皇冠陆放) | 2021–2025 | 2.5L Hybrid (THS II) | 18" / 20" | Hybrid-only trim. Flaps clear the rear battery cooling duct. |
Australia / NZ | Crown Kluger | 2021–2025 | 2.5L Hybrid / 2.0L Turbo Petrol | 18" / 20" | Both powertrains share identical wheel arch sheet metal. |
Middle East | Crown Kluger (import only) | 2022–2025 | 2.0L Turbo Petrol | 18" / 20" | Verify bumper lower valence — some Gulf-spec trims use a different rear diffuser. |
China (parallel export) | Highlander XU70 (export trim) | 2021–2025 | 2.5L Hybrid / 2.0L Turbo | 18" / 20" | Lower fascia is identical to Crown Kluger; this flap set fits both. |
VIN Prefix Verification
China GAC Toyota: VIN prefix LVG — The 7th–10th characters indicate model year and body style. Share this with your supplier for batch-order accuracy.
Australia: VIN prefix JTN or MR2 — Both prefixes cover the XU70 platform; confirm the production month against the table above.
Steel wheel trims: This flap set is designed for alloy wheel trims (18" and 20"). If your market has a base steel-wheel trim, the flap contour may require a 3mm shim — contact us for custom tooling.
What's NOT Compatible
XU50 Highlander (2013–2019) — Completely different wheel arch contour; do not attempt cross-fitment.
Concept or aftermarket wide-body kits — The flap contour assumes factory fender width. Wide-body kits require custom fabrication.
Technical Specifications — Crown Kluger Mud Flaps
Parameter | PP (Rigid) Option | TPE (Flexible) Option | ABS Painted Option |
Material | Polypropylene (injection molded) | Thermoplastic Elastomer (extruded + pressed) | ABS substrate + matte PU topcoat |
Thickness | 3.0 mm | 2.5 mm | 2.8 mm (ABS) + 0.15 mm (coating) |
Operating temp | -30°C to +80°C | -40°C to +70°C | -20°C to +90°C |
Surface finish | Textured (anti-scratch) | Smooth matte | Body-color matched (painting required) |
Fastener type | Plastic fender clips (included) | Plastic clips + 304 stainless screws | Clips + screws (pre-installed) |
Drilling required? | No (clip-on for factory holes) | Partial (rear flap only) | Yes (all 4 flaps) |
Weight (4-piece set) | 0.85 kg | 0.65 kg | 1.10 kg |
Compliance | REACH / RoHS | REACH / RoHS | REACH / RoHS / OEM color match |
Manufacturing Process
Injection molding (PP): Molded in a single shot with pre-installed brass inserts for screw retention. Cycle time ~45 seconds per flap.
TPE extrusion + pressing: TPE sheet is extruded then die-cut to shape; edges are heat-smoothed to prevent delamination. Lead time ~7 days for custom colors.
ABS painting: E-coated ABS substrate, then 2K polyurethane topcoat baked at 80°C. Color matching uses spectrophotometer reading from the vehicle's door edge.
Packaging Specification
Individual set: 4 flaps + 1 hardware bag + 1 instruction sheet in a 450×300×80 mm PE bag.
Master carton: 10 sets per carton (480×320×280 mm, ~9 kg gross). Custom master carton print available at 500-set MOQ.
Private label: Hang tags, blisters, and color-box options available — request the packaging catalog.
Q1: Are these flaps compatible with the 2024 facelift Crown Kluger?
Yes. The 2024 facelift (XU70 mid-cycle update) changed the front bumper lower valence and headlight design, but the wheel arch sheet metal and inner liner attachment points are unchanged. This flap set fits both pre-facelift (2021–2023) and facelift (2024–present) without modification.
Q2: Can I order a mixed container (PP + TPE) for market testing?
Absolutely. Our MOQ is 100 sets per material type, but we accept mixed containers at 500 sets total. For example: 300 sets PP (Black) + 200 sets TPE (Black). Mixed-container orders receive a consolidated fitment guide covering both material types.
Q3: Is the ABS painted option available in "Crown Kluger" body colors?
Yes. The most common Crown Kluger colors are: Emotional Red II, Dark Blue Mica, Attitude Black, and Ice Ecru. Provide your target market's popular colors and we will match using a spectrophotometer reading. Minimum order for painted flaps: 200 sets per color. Sample plaques (50×50 mm painted panels) are available for color verification before bulk production.
Q4: Do you provide fitment data for my market's vehicle type approval (e.g., GCC, TUV)?
Our mud flaps are classified as non-safety-critical accessories and typically do not require separate type approval.
For distributors supplying the Crown Kluger / Highlander XU70 platform, we offer:
Fitment guide customization — Your logo, local language, and market-specific VIN decoder QR code.
Consolidated shipping — Combine with other XU70 accessories (door visors, car mats) in a single container to optimize shipping cost.
After-sales support — Fitment dispute resolution with photo-based verification within 48 hours.
