Table of Contents
This kit dresses three body areas of the Suzuki Every DA17 in one order. It carries door trim for the door frames, pillar cover for the vertical pillar posts, and window trim for the lower window line, all in mirror-polished stainless steel. Buying them together means the bright line runs unbroken around the cabin instead of stopping where one package ends.
Covers the door frame sections of the front and sliding cargo doors
Long stainless steel sections follow the frame contour, shorter sections cover the door ends
Hides the scuffed and UV-faded plastic along the frame edge
Trim only, the door panel and the window glass are not touched
Covers the vertical pillar posts between the doors and behind the rear door
Each post section is a one-piece moulding in mirror-polished stainless steel
The pillar posts are the most touched part of the body when doors are opened and closed daily
Short upper accent sections complete the pillar line
Covers the lower window line along the side glass of every door
Long straight sections run under the glass, one angled section follows the front pillar line
Protects the window sill edge from stone chips and luggage scuffs during loading
Trim only, it does not sit on the glass and it is not a window visor
Stainless steel resists rust and road salt, which matters in coastal and humid export markets
The mirror-polished surface holds a bright line longer than painted plastic trim under UV exposure
One material across all three areas means the finish never mismatches between parts
The metal pieces add a premium dress-up line that reads at a distance on a working van
The Every DA17 has been in production since 2015, and genuine body trim supply varies by region and production year
This aftermarket kit fills the replacement gap for used-car exporters and refurbishment workshops
Buyers who only need one body area can order the same pieces individually, the kit is a bundling of the three
Specifications follow the production configuration shown in the source images and confirmed on the product page. Final goods follow the contract agreement and buyer-confirmed production requirements.
Product type: exterior trim set (door trim, pillar cover and window trim)
Material: stainless steel
Surface finish: mirror-polished
Colour: polished silver
Coverage: three body areas, door frames, pillar posts and lower window line
Fitment: Suzuki Every DA17, 2015-Present
Door trim group: six stainless steel sections, long frame sections plus shorter end sections
Pillar cover group: six stainless steel post sections, shown as three pairs
Window trim group: four stainless steel sections, long sill sections plus an angled front section
The piece count per group is counted from the source product photos and is confirmed against the production sample before shipment
Tool-free installation with the pre-applied automotive-grade adhesive backing
Surface prep: degrease the trim surface with isopropyl alcohol (IPA) and let it dry fully
Working temperature: 18-38 °C ambient for proper adhesion; warm the tape gently in cold weather
Press each section firmly for 1-2 minutes, working from the centre outward to push out air
Cure time: 24 hours initial bond, 72 hours full bond before washing
Do not paint: the polished steel surface is the product finish, and paint on bare stainless will peel
Wash with neutral car shampoo and a microfibre cloth only
Avoid abrasive polishes, acidic cleaners and automatic car washes with stiff brushes
Rinse off road salt after coastal driving to protect the surface long term
Door trim, pillar cover and window trim sections in one set
Pre-applied adhesive backing on every section
Fitting instruction sheet with piece-position diagram
This exterior trim set is listed for the 2015-Present Suzuki Every DA17. The source page fitment covers the DA17 without separating body styles, and the door frame, pillar post and window line profiles are shared across the van and the wagon, so one kit covers either body.
2015-Present Suzuki Every DA17 (6th generation)
Van (DA17V) and wagon (DA17W) body styles
Left-hand drive and right-hand drive layouts
Covers the door frames, the pillar posts and the lower window line
Mazda Scrum (shared DA17 platform architecture)
Nissan NV100 Clipper (DA17 platform rebadge)
Mitsubishi Minicab Van and Mitsubishi Town Box (DA17 platform rebadges)
This is a combined kit for three body areas. If you only need one of them, order that group separately rather than paying for the full set
Compare the supplied sections against your own door frames, pillar posts and window line before fitting, since the profiles differ between body styles and grades
Check the sliding cargo door area separately, the frame profile behind the sliding door is not the same as the front door
Suzuki carried out a major facelift in 2026 and some markets now use DA18 badging; verify the chassis code stamped on the firewall if your vehicle is a 2026 or later model
What is included in this set?
The kit carries three types of stainless steel trim in one package: door trim for the door frames, pillar cover for the vertical pillar posts, and window trim for the lower window line. The source product photos show the door trim group as six sections, the pillar cover group as six post sections and the window trim group as four sections. The count is confirmed against the production sample before shipment.
Can I buy just one of the three parts?
Yes. The three groups are also supplied separately, so a buyer who only needs the pillar posts or only the window line does not have to take the full kit. This page is for the combined set.
What material is it and does it rust?
Every section is stainless steel with a mirror-polished finish. Stainless steel resists rust and road salt, which is why it holds up in coastal and humid export markets better than painted plastic trim. Clean it with neutral car shampoo and a microfibre cloth, and do not paint it, since paint on bare stainless will peel.
How is it fitted?
Each section carries pre-applied automotive-grade adhesive backing, so there is no drilling, no wiring and no tools. Degrease the surface with isopropyl alcohol, fit at room temperature, press each section firmly from the centre outward, and allow 24 hours for the initial bond and 72 hours for full bond before washing.
Will it fit a 2026 or later Suzuki Every?
Suzuki updated the Every with a 2026 facelift and some markets now use DA18 badging. The body lines are likely unchanged, but we recommend checking the chassis code stamped on the firewall or the vehicle registration before ordering.
Jaecoo is Chery's SUV brand built only for overseas buyers. This piece examines why it was created, how its J5–J8 models carry the "elegant off-road" idea, and what its UK and Southeast Asia sales truly show. It covers the "Temu Range Rover" joke, the SHS hybrid that suits weak charging networks, and a clear-eyed verdict: Jaecoo has proved it can get hot — but not yet that it can stay.