The product images displayed on the product pages are real photographs, provided for reference purposes only. To help users clearly identify the corresponding positions of compatible models (for example, a close-up of the rear trunk area outline), certain images are quoted from the Autohome or others open databases. The copyright of these reference images belongs to the websites. We welcome custom orders, wholesale inquiries, and export business for aftermarket parts and accessories. Product specifications shall follow the production requirements confirmed by buyers. Please kindly note that the actual goods delivered shall be based on the contract agreement and final inspection results.

The Description Difference between Model Years and Production Years

Due to our use of open network databases, like Wikipedia and Autohome, for some of our vehicle data, there might be minor variations in the descriptions found in our SKU designs. "Production Years" are the years when a specific model is first introduced to the public market. On the other hand, "Model Years" refer to the different versions of a model that were available to consumers in different years. These differences in model years often come with changes to the exterior or interior design of the vehicle. When searching for car information on websites or through dealers, typically you are searching based on 'Model Years'. For instance, the third generation of the Honda Accord was introduced on June 4th, 1985, and ceased production in 1989. ‘1985-1989’ represents the ‘Production Years’ of the Accord, while the ‘Model Years’ in automobile databases are listed as ‘1986-1989’. Due to the different sources of information, there may be differences in the way they are presented. As our products cover car parts and accessories, we have incorporated both "Production Years" and "Model Years" terminology. Please note this.

Compatibility Description of Auto Parts

Auto parts are essential components for the proper functioning of vehicles used in car assembly lines or for maintenance and repair services after purchase. Autobridge™ (Xiamen) provides a wide range of OES, aftermarket replacement parts, including AC compressors, cylinder heads, oil pumps, power steering pumps, starter motors, and turbochargers. These components are installed in powertrains, steering systems, rear axle assemblies, and chassis assemblies. Auto parts need to meet the design specifications and performance requirements of the original equipment manufacturer (OEM) parts, as well as comply with local regulations or CAPA certification. Depending on the requirements based on OEMs (Original Equipment Manufacturers) for material or design improvements, aftermarket parts may outperform the original genuine parts.

Compatibility Description of Car Accessories

Car accessories are AFTERMARKET MODIFIED PARTS for cars after the production line. Autobridge™ (Xiamen) offers a variety of accessories, including an airflow snorkel, bumper, door visors, matting, spoiler, and trunk tray. The car accessories are not performance parts and generally do not affect the original power and safety. They are used to modify the appearance style, enhance off-road capabilities, or increase driving comfort. Compared to the genuine accessories, we offer customization services for aftermarket replacement accessories that cater to the buyer's specific requirements. Each accessory can be designed specifically for different car models.

All
Product Name
Product Keyword
Product Model
Product Summary
Product Description
Multi Field Search

TIP: Search results will list the matched SKUs.

About Autobridge™ » Car Accessories Range » Car Brands » BMW » 5 Series » 2011-2016 BMW 5 Series Mud Flaps | F10 Sedan, F18 LWB & M5 Compatible

Buy BMW Car Splash Shields fit 2011-2016 5-Series (F10)

Share to:

2011-2016 BMW 5 Series Mud Flaps | F10 Sedan, F18 LWB & M5 Compatible

Fitment:
BMW 5-Series
MOQ:
100 sets
Delivery Terms:
FOB, CIF
Payment Type:
T/T, L/C, Credit Card, Western Union
Payment Currency:
USD, EUR, HKD
(AKA) Nameplates:
BMW 5 Series, BMW 5 Series Touring, BMW 5 Series Gran Turismo, BMW M5, BMW 5 Series Li
Model Years*:
2011-2016
Car Accessories:
Mud Flaps
Product Synonym:
car mudguards, car splash guards, mud flaps

Fitment:	2011-2016 5-Series (F10) 6th-Gen
Style:	Black Thicken 4Pcs
SKU:
Availability:

Quantity:



Precision-moulded from impact-resistant PP polymer with UV stabilisation, maintaining flexibility from -30°C to 80°C without cracking or warping across diverse climate zones. All-weather protection for the F10 generation 5 Series, deflecting road debris, stone chips, mud and salt spray away from door sills, rocker panels and wheel arches. OEM-profile contours match BMW factory fender geometry, with pre-drilled mounting holes aligned to existing fender liner attachment points for tool-light installation. Export-ready sets include 4 pieces (2 front 210×295mm + 2 rear 275×310mm) with three fastener types, covering F10 sedan and F18 long-wheelbase variants sold in China, Middle East and Mexico.
Add to Basket

Color

Black

Product Sizes

Front wheel: 210*295mm

Rear wheel: 275*310mm

Number of Sets

4 PCS

Fastener Ready

Yes

Material

PP soft plastic

Table of Contents

Vehicle Application

BMW 5 Series Sedan (F10): 6th generation standard-wheelbase sedan, 2011-2016 model years, global market coverage
BMW 5 Series Li (F18): long-wheelbase sedan, 2011-2016, assembled at BMW Plant Shenyang for China, Middle East, Mexico and Turkey markets
BMW M5 (F10M): high-performance variant sharing F10 body shell, flared fenders may require fitment verification
Facelift (LCI) coverage: pre-LCI (2011-2013) and LCI (2014-2016) both confirmed compatible, fender arch geometry unchanged across facelift
Engine variants: compatible with all engine options including 520i, 523i, 528i, 530i, 535i, 550i, 520d, 525d, 530d, 535d and ActiveHybrid 5

Not Compatible

BMW 5 Series Gran Turismo (F07): built on F01 7 Series platform with unique body shell and fender design, completely different mounting geometry
BMW 5 Series Touring (F11): rear mud flaps not compatible due to wagon rear quarter panel contour; front mud flaps may be compatible (verification recommended)
Previous generation (E60, 2003-2010): different body architecture and fender mounting points
Next generation (G30/G38, 2017-present): redesigned body shell with different fender geometry

Product Overview

Material Options

PP (Standard): High-elasticity polypropylene, impact-resistant, factory black finish, default option for most export markets
PP+TPE: Dual-material construction with PP core and TPE edge overlay, enhanced cold-weather flexibility for Northern Europe and high-altitude markets
TPE (Premium): Thermoplastic elastomer with superior UV resistance and low-temperature performance, recommended for Middle East and Nordic markets
ABS (Rigid): Acrylonitrile butadiene styrene, higher surface hardness and glossier finish, available on request for custom programmes

Specifications

Front flap dimensions	210 × 295 mm
Rear flap dimensions	275 × 310 mm
Set contents	4 pieces (2 front + 2 rear)
Standard colour	Black
Surface finish	Textured matte
Operating temperature	-30°C to 80°C
UV stabilisation	Yes, automotive-grade additive package

Installation

Mounting type: Fender liner attachment using existing BMW mounting points, no drilling required for standard fitment
Fasteners included: Plastic fender fastener clips (match BMW OEM clip design), U-clip screws, Allen screws with hex key
Installation time: approximately 20-30 minutes per axle, basic hand tools sufficient

Manufacturing Process

Injection moulding (standard): PP material, 2.0-2.5 mm wall thickness, tight dimensional tolerance, suitable for volume orders above 500 sets
Plastic uptake forming: vacuum-formed sheets, 1.2-1.8 mm wall thickness, lower tooling cost, suitable for small batch and custom orders

Fitment Guide

BMW 5 Series Sedan (F10)

Market	Model Years	Engine Variants	Compatibility
Global (excl. China/ME)	2011-2016	520i, 523i, 528i, 530i, 535i, 550i, 520d, 525d, 530d, 535d	Confirmed direct fit
Pre-LCI (2011-2013)	2011-2013	All variants	Confirmed direct fit
LCI facelift (2014-2016)	2014-2016	All variants	Confirmed direct fit

BMW 5 Series Li (F18) Long Wheelbase

Market	Model Years	Engine Variants	Compatibility
China (BMW Brilliance)	2011-2016	520Li, 525Li, 528Li, 530Li, 535Li	Confirmed direct fit (shared fender arch with F10)
Middle East	2011-2016	528i, 535i, 550i	Confirmed direct fit
Mexico, Turkey	2011-2016	528i, 535i	Confirmed direct fit

BMW M5 (F10M)

Market	Model Years	Notes	Compatibility
Global	2011-2016	S63 twin-turbo V8, flared fenders, wider track	Verification required (fender flare geometry)

BMW ActiveHybrid 5 (F10)

Market	Model Years	Notes	Compatibility
Global	2012-2016	N55 + electric motor, same F10 body	Confirmed direct fit

Exclusions

BMW 5 Series Touring (F11): rear mud flaps not compatible, wagon rear quarter panel has different contour; front mud flaps may fit but verification recommended
BMW 5 Series Gran Turismo (F07): not compatible, shares F01 7 Series platform with unique body shell, wheelbase 3,070 mm vs 2,968 mm, different fender design
BMW 5 Series (E60): previous generation 2003-2010, completely different body architecture
BMW 5 Series (G30/G38): next generation 2017-present, redesigned fender geometry

Material & Finish Options

AutoBridge supplies aftermarket mud flaps manufactured to OEM-compatible specifications. All materials are formulated for automotive exterior use with UV stabiliser additive packages.

Material Selection Guide

Material	Best For	Temperature Range	MOQ
PP (Standard)	General export, temperate climates	-20°C to 70°C	100 sets
PP+TPE	Cold climate markets, Northern Europe	-30°C to 80°C	100 sets
TPE	Premium markets, Middle East, Nordic	-40°C to 90°C	100 sets
ABS	Custom colour matching, glossy finish	-10°C to 60°C	200 sets

Fastener Package

Plastic fender fastener clips (standard, matches BMW OEM clip design)
U-clip screws (supplementary retention for high-vibration environments)
Allen screws with hex key (tool included, corrosion-resistant zinc-plated)

Customisation Available

Logo embossing or debossing on flap surface
Custom colours beyond standard black (MOQ applies, contact us for details)
Branded packaging for distributor programmes
Combined fastener kits tailored to specific market requirements

About Product Pics

The product images displayed on the product pages are real photographs, provided for reference purposes only. To help users clearly identify the corresponding positions of compatible models (for example, a close-up of the rear trunk area outline), certain images are quoted from the Autohome or others open databases. The copyright of these reference images belongs to the websites.

We welcome custom orders, wholesale inquiries, and export business for aftermarket parts and accessories. Product specifications shall follow the production requirements confirmed by buyers. Please kindly note that the actual goods delivered shall be based on the contract agreement and final inspection results.

The Description Difference between Model Years and Production Years

Due to our use of open network databases, like Wikipedia and Autohome, for some of our vehicle data, there might be minor variations in the descriptions found in our SKU designs. "Production Years" are the years when a specific model is first introduced to the public market. On the other hand, "Model Years" refer to the different versions of a model that were available to consumers in different years. These differences in model years often come with changes to the exterior or interior design of the vehicle. When searching for car information on websites or through dealers, typically you are searching based on 'Model Years'. For instance, the third generation of the Honda Accord was introduced on June 4th, 1985, and ceased production in 1989. ‘1985-1989’ represents the ‘Production Years’ of the Accord, while the ‘Model Years’ in automobile databases are listed as ‘1986-1989’. Due to the different sources of information, there may be differences in the way they are presented. As our products cover car parts and accessories, we have incorporated both "Production Years" and "Model Years" terminology. Please note this.
Compatibility Description of Auto Parts

Auto parts are essential components for the proper functioning of vehicles used in car assembly lines or for maintenance and repair services after purchase. Autobridge™ (Xiamen) provides a wide range of OES, aftermarket replacement parts, including AC compressors, cylinder heads, oil pumps, power steering pumps, starter motors, and turbochargers. These components are installed in powertrains, steering systems, rear axle assemblies, and chassis assemblies. Auto parts need to meet the design specifications and performance requirements of the original equipment manufacturer (OEM) parts, as well as comply with local regulations or CAPA certification. Depending on the requirements based on OEMs (Original Equipment Manufacturers) for material or design improvements, aftermarket parts may outperform the original genuine parts.
Compatibility Description of Car Accessories

Car accessories are AFTERMARKET MODIFIED PARTS for cars after the production line. Autobridge™ (Xiamen) offers a variety of accessories, including an airflow snorkel, bumper, door visors, matting, spoiler, and trunk tray. The car accessories are not performance parts and generally do not affect the original power and safety. They are used to modify the appearance style, enhance off-road capabilities, or increase driving comfort. Compared to the genuine accessories, we offer customization services for aftermarket replacement accessories that cater to the buyer's specific requirements. Each accessory can be designed specifically for different car models.

Related Products

Car Splash Guards Wholesale for 2017-2023 BMW 5-Series (G30)

Buy OEM Car Mudguards for BMW 5-Series (E60)

Buy OEM Car Mudguards for 2005-2010 BMW 5-Series (E60)

OEM Vent Visors Supply fit 1987-2023 BMW 5 Series

Exploring Daihatsu's Commercial Vehicle Duo: The Generational Lineage and History of Hijet and Gran Max

2026/06/02

The Hijet and the Gran Max—one is the ultimate space-saving product under Japan's micro commercial vehicle regulations, and the other is a globalized model that broke free from those constraints to reach the pinnacle of practicality. Whether navigating narrow Tokyo alleys or driving across the vast Southeast Asian market, they demonstrate Daihatsu's "compact cars, big impact" philosophy through solid quality and continuous generational inheritance.

cover-pic-daihatsu-hijet-gran-max-generations-history.jpg

Related News

content is empty!