The product images displayed on the product pages are real photographs, provided for reference purposes only. To help users clearly identify the corresponding positions of compatible models (for example, a close-up of the rear trunk area outline), certain images are quoted from the Autohome or others open databases. The copyright of these reference images belongs to the websites. We welcome custom orders, wholesale inquiries, and export business for aftermarket parts and accessories. Product specifications shall follow the production requirements confirmed by buyers. Please kindly note that the actual goods delivered shall be based on the contract agreement and final inspection results.

The Description Difference between Model Years and Production Years

Due to our use of open network databases, like Wikipedia and Autohome, for some of our vehicle data, there might be minor variations in the descriptions found in our SKU designs. "Production Years" are the years when a specific model is first introduced to the public market. On the other hand, "Model Years" refer to the different versions of a model that were available to consumers in different years. These differences in model years often come with changes to the exterior or interior design of the vehicle. When searching for car information on websites or through dealers, typically you are searching based on 'Model Years'. For instance, the third generation of the Honda Accord was introduced on June 4th, 1985, and ceased production in 1989. '1985-1989' represents the 'Production Years' of the Accord, while the 'Model Years' in automobile databases are listed as '1986-1989'. Due to the different sources of information, there may be differences in the way they are presented. As our products cover car parts and accessories, we have incorporated both "Production Years" and "Model Years" terminology. Please note this.

Compatibility Description of Auto Parts

Auto parts are essential components for the proper functioning of vehicles used in car assembly lines or for maintenance and repair services after purchase. Autobridge™ (Xiamen) provides a wide range of OES, aftermarket replacement parts, including AC compressors, cylinder heads, oil pumps, power steering pumps, starter motors, and turbochargers. These components are installed in powertrains, steering systems, rear axle assemblies, and chassis assemblies. Auto parts need to meet the design specifications and performance requirements of the original equipment manufacturer (OEM) parts, as well as comply with local regulations or CAPA certification. Depending on the requirements based on OEMs (Original Equipment Manufacturers) for material or design improvements, aftermarket parts may outperform the original genuine parts.

Compatibility Description of Car Accessories

Car accessories are AFTERMARKET MODIFIED PARTS for cars after the production line. Autobridge™ (Xiamen) offers a variety of accessories, including an airflow snorkel, bumper, door visors, matting, spoiler, and trunk tray. The car accessories are not performance parts and generally do not affect the original power and safety. They are used to modify the appearance style, enhance off-road capabilities, or increase driving comfort. Compared to the genuine accessories, we offer customization services for aftermarket replacement accessories that cater to the buyer's specific requirements. Each accessory can be designed specifically for different car models.

All
Product Name
Product Keyword
Product Model
Product Summary
Product Description
Multi Field Search

TIP: Search results will list the matched SKUs.

About Autobridge™ » Car Accessories Range » Car Brands » BYD » Tang » BYD Tang DM-P Splash Guards: Dragon Face 3.0 Body Contour Fit (2022)

Car Splash Shields Wholesale fit BYD Tang DM-P

Share to:

BYD Tang DM-P Splash Guards: Dragon Face 3.0 Body Contour Fit (2022)

Fitment:
BYD Tang DM-P
MOQ:
100 sets
Delivery Terms:
FOB, CIF
Payment Type:
T/T, L/C, Credit Card, Western Union
Payment Currency:
USD, EUR, HKD
(AKA) Nameplates:
BYD Tang DM-P, BYD Tang DM-i, BYD Tang EV
Model Years*:
2022
Car Accessories:
Mud Flaps
Product Synonym:
car mudguards, car splash guards, mud flaps, splash shields

Fitment:	2022 Tang DM-P
Style:	Black Thicken 4Pcs
SKU:
Availability:

Quantity:



Vehicle-specific design for the 2022 BYD Tang DM-P, matching Dragon Face 3.0 facelift wheel arch profiles and lower body contours Factory-matched for China's performance PHEV segment; the 4.3-second Tang is a growing export target for Southeast Asian and Middle Eastern distributors Custom-contoured to shield lower body panels from mud, gravel and road debris across urban commutes and mixed-terrain duty cycles Direct-fit in PP, PP+TPE, TPE or ABS formulations with included fastener hardware for tool-light installation
Add to Basket

Color

Black

Number of Sets

4 PCS

Fastener Ready

Yes

Material

PP soft plastic

Table of Contents

Application: 2022 BYD Tang DM-P

Engineered to match the BYD Tang's Dragon Face 3.0 facelift body, these mud flaps contour to the wheel arch profiles introduced in the 2022 model year update. The DM-P variant shares its body shell with the DM-i and EV variants, ensuring cross-powertrain compatibility for buyers sourcing parts across the Tang lineup.

Compatible Variants (2022+)

BYD Tang DM-P (2022-present): Performance PHEV, 1.5T engine + dual motors, 452 kW combined, 4.3s 0-100 km/h, 215 km pure electric range
BYD Tang DM-i (2022-present): Efficiency PHEV, 252 km pure electric range variant available, same body shell and wheel arch geometry
BYD Tang EV (2022-present): Pure electric variant, exported to Thailand and other SEA markets, identical body dimensions

Not Compatible / Requires Verification

BYD Tang 1st Gen (2015-2018): Based on the BYD S6 platform, completely different body dimensions and wheel arch design. Physically incompatible.
BYD Tang 2nd Gen pre-facelift (2018-2021): Dragon Face 2.0 design. Shares the same 2820 mm wheelbase and body platform, but front and rear lower bumper profiles differ from the 2022 facelift. Physical verification of mounting points recommended before bulk ordering.

Body Specifications

Length: 4870 mm | Width: 1950 mm | Height: 1725 mm
Wheelbase: 2820 mm | Front track: 1650 mm | Rear track: 1630 mm
Body style: 5-door SUV, 7-seat (optional 6-seat) layout
Platform: BYD DM 3.0 architecture, mid-size SUV segment

Product Overview

Material Options

PP (Standard): High-elasticity polypropylene, impact-resistant, factory black finish, default option for most export orders
PP+TPE: Polypropylene base with TPE overlay, enhanced cold-weather flexibility, recommended for markets with sub-zero winters
TPE: Thermoplastic elastomer, premium feel, superior UV resistance, non-marking surface, higher unit cost
ABS (Rigid): Acrylonitrile butadiene styrene, higher surface hardness, glossier finish, available on request for show-use applications

Color Options

Standard: Matte black (factory default)
Custom: Gloss black, body-color matched, carbon-look texture (MOQ applies)

Manufacturing Process

Injection moulding: Achieves tighter tolerance (2.0-2.5 mm wall thickness), consistent curvature matching OEM wheel arch profiles. Higher tooling cost, lower per-unit cost at volume. Recommended for orders above 500 sets.
Plastic uptake forming: Vacuum-formed from sheet stock (1.2-1.8 mm wall thickness), lower tooling cost, faster prototyping. Suitable for sample orders and smaller batch runs.

Product Specifications

Quantity: 4 pieces per set (front left, front right, rear left, rear right)
Surface finish: Textured matte black (standard)
UV stabilizer: Added to all formulations for outdoor durability
Fastener hardware: Included with every set (see Tab 4 for details)

Fitment Guide: BYD Tang Cross-Generation Compatibility

2022+ BYD Tang (Dragon Face 3.0 Facelift): Confirmed Compatible

Variant	Powertrain	Years	Status
Tang DM-P	1.5T PHEV (dual motor, AWD)	2022-present	Direct fit
Tang DM-i	1.5L PHEV (single motor, FWD)	2022-present	Direct fit
Tang EV	Pure electric (single/dual motor)	2022-present	Direct fit

All 2022+ Tang variants share identical body shell stamping, wheel arch geometry and lower body mounting points. One mud flap set fits all three powertrain configurations.

Pre-Facelift 2nd Gen (2018-2021): Verification Required

Variant	Design Language	Years	Status
Tang DM	Dragon Face 2.0	2018-2021	Verify before ordering
Tang EV	Dragon Face 2.0	2018-2021	Verify before ordering

The pre-facelift 2nd gen shares the same platform and wheelbase (2820 mm), but the 2022 facelift revised front and rear lower bumper profiles. Mud flap mounting points at the wheel arch edges are likely unchanged, but the lower extension contour differs. We recommend ordering a sample set for physical fitment testing before committing to volume.

1st Gen (2015-2018): Not Compatible

Variant	Platform	Years	Status
Tang DM (1st gen)	BYD S6 platform	2015-2018	Incompatible

The 1st generation Tang was built on the BYD S6 mid-size SUV platform with different body dimensions, wheel arch curvature and mounting point locations. A separate SKU is required for 1st gen fitment.

Installation & Hardware

Mounting Method

Screw-on with OEM mounting points: Utilizes existing factory mounting holes in the wheel arch lip. No drilling required for the 2022+ Tang body shell.
Clip-on supplementary fasteners: Plastic fender fastener clips provide additional retention at the lower edge. No permanent modification to the vehicle body.

Fastener Hardware (Included)

Plastic Fender Fastener Clips: Push-in style, matches BYD factory wheel arch clip specification. Black color, UV-stabilized.
U-Clip Screws: U-shaped mounting clips with self-tapping screws for secure attachment to the inner fender panel.
Allen Screws with Hex Key: M6 hex head screws with matching Allen key tool provided. Corrosion-resistant zinc plating.

Installation Notes

Estimated install time: 20-30 minutes per vehicle, 4 corners
No special tools required beyond the included hex key
Recommended to test-fit each piece before final tightening to confirm alignment with the Dragon Face 3.0 wheel arch contour
For pre-facelift 2nd gen Tang (2018-2021), verify mounting hole alignment before installation as bumper lower profiles differ

Aftermarket Notice

These mud flaps are aftermarket accessories manufactured to OEM-compatible specifications. They are not genuine BYD parts and are not affiliated with or endorsed by BYD Auto Co., Ltd. Material specifications and dimensional accuracy meet or exceed OEM-grade standards for aftermarket export supply.

About Product Pics

The product images displayed on the product pages are real photographs, provided for reference purposes only. To help users clearly identify the corresponding positions of compatible models (for example, a close-up of the rear trunk area outline), certain images are quoted from the Autohome or others open databases. The copyright of these reference images belongs to the websites.

We welcome custom orders, wholesale inquiries, and export business for aftermarket parts and accessories. Product specifications shall follow the production requirements confirmed by buyers. Please kindly note that the actual goods delivered shall be based on the contract agreement and final inspection results.

The Description Difference between Model Years and Production Years

Due to our use of open network databases, like Wikipedia and Autohome, for some of our vehicle data, there might be minor variations in the descriptions found in our SKU designs. "Production Years" are the years when a specific model is first introduced to the public market. On the other hand, "Model Years" refer to the different versions of a model that were available to consumers in different years. These differences in model years often come with changes to the exterior or interior design of the vehicle. When searching for car information on websites or through dealers, typically you are searching based on 'Model Years'. For instance, the third generation of the Honda Accord was introduced on June 4th, 1985, and ceased production in 1989. ‘1985-1989’ represents the ‘Production Years’ of the Accord, while the ‘Model Years’ in automobile databases are listed as ‘1986-1989’. Due to the different sources of information, there may be differences in the way they are presented. As our products cover car parts and accessories, we have incorporated both "Production Years" and "Model Years" terminology. Please note this.
Compatibility Description of Auto Parts

Auto parts are essential components for the proper functioning of vehicles used in car assembly lines or for maintenance and repair services after purchase. Autobridge™ (Xiamen) provides a wide range of OES, aftermarket replacement parts, including AC compressors, cylinder heads, oil pumps, power steering pumps, starter motors, and turbochargers. These components are installed in powertrains, steering systems, rear axle assemblies, and chassis assemblies. Auto parts need to meet the design specifications and performance requirements of the original equipment manufacturer (OEM) parts, as well as comply with local regulations or CAPA certification. Depending on the requirements based on OEMs (Original Equipment Manufacturers) for material or design improvements, aftermarket parts may outperform the original genuine parts.
Compatibility Description of Car Accessories

Car accessories are AFTERMARKET MODIFIED PARTS for cars after the production line. Autobridge™ (Xiamen) offers a variety of accessories, including an airflow snorkel, bumper, door visors, matting, spoiler, and trunk tray. The car accessories are not performance parts and generally do not affect the original power and safety. They are used to modify the appearance style, enhance off-road capabilities, or increase driving comfort. Compared to the genuine accessories, we offer customization services for aftermarket replacement accessories that cater to the buyer's specific requirements. Each accessory can be designed specifically for different car models.

Related Products

Custom Car Splash Guards Compatible with 2021 BYD Tang DM EV

OEM Car Mudguards Wholesales fit 2015-2018 BYD Tang DM

OEM Car Mudguards Wholesales fit 2018-2022 BYD Tang 1st-Gen

EV SUV Floor Mats Export fit 2018-2022 BYD Tang DM

Exploring Daihatsu's Commercial Vehicle Duo: The Generational Lineage and History of Hijet and Gran Max

2026/06/02

The Hijet and the Gran Max—one is the ultimate space-saving product under Japan's micro commercial vehicle regulations, and the other is a globalized model that broke free from those constraints to reach the pinnacle of practicality. Whether navigating narrow Tokyo alleys or driving across the vast Southeast Asian market, they demonstrate Daihatsu's "compact cars, big impact" philosophy through solid quality and continuous generational inheritance.

cover-pic-daihatsu-hijet-gran-max-generations-history.jpg

Related News

content is empty!