Midsize Saloon Floor Mats UAE Wholesale fit 2020-2021 Geely Preface (FS11)

Product Overview

Precision Fit — Geely Preface FS11 (CMA Platform)

Each car mat is 3D laser-scanned and CNC-molded to the exact footwell dimensions of the 2020-Present Geely Preface (FS11), capturing the unique floorpan contours of Geely's Compact Modular Architecture — the same platform underpinning the Volvo XC40 and Polestar 2. The mat set is the result of a 9-step manufacturing process beginning with high-precision 3D laser capture of the Preface cabin, ensuring an OEM-grade fit that drops into place without trimming or gap-filling.

Full compatibility confirmed across all FS11 powertrain configurations: 2.0L turbo (JLH-4G20TD, 190 PS, 7-speed DCT), 1.5L turbo (BHE15-EFZ, 181 PS, 7-speed DCT), and 1.5L HEV Zhiqing (163 PS ICE + 136 PS e-motor, 3-speed DHT). The HEV battery pack (located under the rear seat area) does not alter front or rear footwell dimensions. The 2023 facelift as Xingrui L / Preface L shares the identical FS11 floorpan — one mat set fits the entire 2020-Present production run. Compatible with all export-market nameplates: Volga C50 (Russia, 2024+) and Geely Galaxy Preface (Kazakhstan).

Important: 2nd-generation FS21 (Xingrui L Plus, 2026+) is NOT compatible. The FS21 features a larger platform (wheelbase 2,845 mm vs 2,800 mm, length 4,956 mm vs 4,785 mm) with a different floorpan pressing. This mat set is designed exclusively for the FS11 generation (2020-Present).

Material Options

Manufacturing Process — 9-Step Laser-Scanned Production

1. Laser scanning — High-precision 3D scanning captures the Preface's CMA-platform footwell geometry, producing exact dimensional data for CNC toolpath generation.

2. Computer modeling & pattern making — Engineers create virtual models with material-specific allowances, enabling logo placement, pattern customization, and trim-level adaptations to buyer specifications.

3. Material cutting — Computer-guided cutting machinery trims TPE, EVA, leather, or carpet to precise vehicle-specific contours including pedal cutouts and seat rail clearances.

4. Heating & softening — Material is heat-conditioned to optimal pliability for precise mold conformity during pressing.

5. Placement into mold — Softened material is positioned into CNC-machined molds replicating the Preface floorpan surface to sub-millimeter accuracy.

6. Integral forming — Multi-layer compression (top surface + EVA interlayer + underfelt/backing) fuses into a single bonded piece under controlled heat and pressure.

7. Manual trimming — Skilled operators trim excess material along mold parting lines for clean edges on all sides.

8. Manual edge wrapping & stitching — Edge banding is applied and stitched where specified (leather variants), with EVA interlayer providing structural integrity and cushioned underfoot feel.

9. Heel pad embossing — Reinforced heel pad heat-embossed or stitched into the driver-side mat; replaceable as a wear item.

Pattern & Color Customization

7 patterns available: Luxury Diamond, Braided, Carbon Fiber-Like, Crocodile, Grain-Like, Hermès-Like Vache Liegee Leather, Square Diamond.

3 standard colors: Beige, Black, Brown — with custom color matching available for bulk orders (MOQ applies).

Optional branding: Hang tag, metal emblem, printed label, custom heel pad logo — all configurable to buyer specification.

Features & Benefits

CMA Platform Precision — European Engineering Pedigree

The Geely Preface rides on the Compact Modular Architecture (CMA), co-developed with Volvo and also used by the Volvo XC40, Polestar 2, and Lynk & Co 02. This platform pedigree means a precisely engineered cabin with tight tolerances and consistent floorpan geometry across all production years (2020-Present). Our laser-scanned tooling captures every nuance of the FS11 floorpan — from the driver-side dead pedal angle to the rear passenger footwell depth — delivering a fit quality comparable to factory-installed mats.

The 2,800 mm wheelbase provides a generously proportioned cabin with ample front and rear legroom. The CMA platform's flat central tunnel design (minimal driveshaft hump, as all FS11 variants are front-wheel-drive) means the rear mats sit flush across the full width, maximizing footwell coverage without gaps or raised ridges.

All-Weather Protection for Diverse Global Climates

Raised-edge containment design (10–15 mm lip height) traps water, mud, snow melt, salt, and road debris within the mat tray. The TPE material remains flexible and non-brittle down to −40 °C — critical for Russian/CIS markets where the Preface (as Volga C50) faces extreme winter conditions with calcium chloride de-icing agents. The waterproof surface prevents liquid seepage into the Preface's carpeted footwell, protecting the underlying floorpan from corrosion.

In warm-climate markets (Middle East/GCC, Southeast Asia), UV-stabilized materials resist sun-induced fading and cracking. The ventilated backing allows moisture evaporation to prevent mold growth in humid conditions — a consideration for Gulf Cooperation Council (GCC) buyers where vehicle interiors can reach 70 °C+ when parked in direct sunlight.

Durable, Comfortable, and Easy to Maintain

TPE mats rinse clean with a pressure washer or garden hose — no detergents required. Leather and carpet variants vacuum or wipe down with mild soap and water. The replaceable driver-side heel pad (embossed or stitched) extends mat service life beyond 100,000 pedal-actuation cycles. When worn, buyers can order a replacement heel pad rather than a full mat set.

Anti-slip backing (burr fabric on leather, molded nibs on TPE) keeps mats firmly in place without interfering with accelerator, brake, or — where equipped — clutch pedal travel. This is a critical safety consideration for the Preface's electronic drive-by-wire pedal assembly, where even minor mat interference can trigger accelerator pedal position sensor faults.

Fitment & Compatibility

Important Compatibility Notes

• All FS11 Preface variants share the same floorpan. The 2.0T, 1.5T, and 1.5T HEV Zhiqing powertrains all use the identical CMA-platform cabin floor pressing. The HEV battery pack (under rear seat) does not affect footwell dimensions. One mat set fits all engine configurations.

• 2023 facelift (Xingrui L / Preface L) — full compatibility confirmed. The 2023 mid-cycle refresh updated exterior styling, interior trim, and added the HEV powertrain, but the floorpan pressing remained unchanged. Mats fit both pre-facelift (2020-2022) and facelift (2023-Present) FS11 vehicles.

• 2nd-gen FS21 (Xingrui L Plus, 2026+) — NOT compatible. The second-generation model revealed July 2026 features a larger CMA-derived platform (wheelbase 2,845 mm, length 4,956 mm) with a completely different floorpan. These mats are designed exclusively for the FS11 generation. Buyers for 2026+ Xingrui L Plus should request the FS21-specific mat set.

• LHD only — all markets. Geely Preface / Xingrui / Volga C50 / Galaxy Preface are all left-hand-drive vehicles across all production locations (Luqiao, China). The mat set is designed for LHD footwell geometry.

• Front-wheel-drive only. The Preface's CMA platform in FS11 specification is exclusively FWD. The flat central tunnel means rear passenger mats sit flush across the full cabin width — no driveshaft hump interference to account for.

• Trunk mat — saloon/sedan configuration. The trunk mat covers the full cargo floor area of the 4-door sedan body, from the tailgate sill to the rear seatback. Compatible with all FS11 Preface variants; not compatible with the unrelated Geely Xingyue SUV or Geely Xingyuan hatchback.

Installation & Maintenance

Installation — 6 Steps

1. Remove old mats. Take out any existing floor mats or carpet liners and vacuum the footwell to remove loose debris and dust.

2. Position driver-side mat. Align the mat with the Preface's pedal box — molded contours should sit flush against the dead pedal (left footrest), accelerator pedal base, and brake pedal cutout. Ensure minimum 10 mm clearance around all pedal edges to prevent interference with the drive-by-wire electronic pedal assembly.

3. Secure mounting clips. Insert the included OEM-style retaining clips into the Preface's factory floor anchor points (located at the front edge of each front footwell). Rotate clips 90° clockwise to lock.

4. Position passenger-side mat. Fit the front passenger mat, aligning with the footwell's outer contour and firewall angle. Clip into place using factory anchor points.

5. Position rear mats. Fit the rear passenger mats — the CMA platform's flat central tunnel and 2,800 mm wheelbase provide a wide, unobstructed rear footwell. Slide mats under the front seat rails and align with the flat center tunnel area. A one-piece rear bench mat covering the full width is available on request.

6. Fit trunk mat (optional). Place the trunk mat into the saloon boot, aligning with the rear seatback angle and luggage tie-down points. The mat covers the full flat load floor of the 4-door sedan trunk compartment.

Maintenance by Material

OEM Customization Services

• Private labeling. Custom logo embossing, branded hang tags, printed labels, and metal emblems per buyer artwork — suitable for Volga C50 or Geely Galaxy Preface dealer-branded accessory programs.

• Color matching. Custom mat colors matched to Preface interior trim codes (Black, Beige, Brown, or Blue/White dual-tone schemes).

• Material upgrades. Mixed-material sets (e.g., TPE front + carpet rear) available on request.

• Pattern selection. Any of 7 available patterns (Luxury Diamond, Braided, Carbon Fiber, Crocodile, Grain, Hermès-Like, Square Diamond) selectable per order.

• Packaging options. Retail box with full-color insert, plain export carton, or branded poly-bag — specified at quotation stage.

Wholesale & Export

MOQ & Ordering

Minimum Order Quantity: 100 sets per design/specification. Mixed-container orders combining multiple SKUs (different vehicle models, materials, or patterns) are supported — contact us for consolidated pricing.

Sample orders: 1–5 sets available for quality evaluation and fitment verification. Sample lead time approximately 7–10 business days, subject to current production queue.

Global Export Markets

Our Geely Preface / Xingrui car mats serve buyers in the following priority regions:

• China (domestic). The largest market with over 140,000 units sold annually (peak: 162,052 in 2024). Factory-direct supply from Zhejiang production base for domestic aftermarket distributors and Geely dealer parts departments.

• Russia & CIS. The Preface is sold as the Volga C50 through the revived Volga brand. Container shipping to St. Petersburg (LED) and Vladivostok (VVO) ports, with inland rail freight to Moscow and regional distribution hubs.

• Kazakhstan & Central Asia. Marketed as the Geely Galaxy Preface through Geely's Galaxy dealer channel. Almaty-based distribution with land freight options via the China-Kazakhstan rail corridor.

• Middle East / GCC. Saudi Arabia, UAE, Qatar — Geely has expanding dealer networks in GCC markets, with Preface positioned as a value-oriented D-segment saloon alternative to Japanese and Korean competitors.

• Southeast Asia. Philippines, Malaysia — Geely brand presence growing; Preface appeals as a premium-feel mid-size sedan at competitive pricing versus Toyota Camry and Honda Accord.

Payment & Logistics