-
- English
 |
Suzuki Every
Universal
100 sets
FOB, CIF
T/T, L/C, Credit Card, Western Union
USD, EUR, HKD
Mazda Scrum Wagon, Mitsubishi Town Box, Nissan NV100 Clipper, Mitsubishi Minicab
2005-2015
Exterior Trim & Accent Covers
side mirror cover, mirror cover, side mirror cap, mirror housing cover, wing mirror cover, door mirror cover, mirror garnish
| Fitment: | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Surface: | |||||||||
| Style: | |||||||||
| Quantity: | |||||||||
| |||||||||
The Suzuki Every 5th-gen DA64W side mirror cover is designed for the wagon platform of the fifth-generation Every, where the factory mirror housing sits on the side door just forward of the front quarter window. The DA64W is the wagon-side counterpart of the DA64V van within the same DA64 generation, so this 2 pc pair kit is engineered for wagon bodies only and does not fit the DA64V van mirror base. The cover dresses the factory mirror shell on both the LH and RH sides without touching the mirror glass, the mirror motor, the side door, or the side door glass.
The 2 pc pair set ships as a left-hand shell and a right-hand shell, each a chrome-acrylic mirror cover (clear PMMA base with chrome-plated surface finish) molded to the shape of the Every DA64W factory mirror housing. The set supports two product variants on the same DA64W wagon: the with-light shell is a self-contained turn signal upgrade that includes a built-in LED light strip and a pigtail wire harness, so once wired into the wagon's electrical circuit the factory mirror gains an integrated turn signal function; the without-light shell is a plain chrome-acrylic decorative cover with no LED and no wiring, used for cosmetic upgrade only. The pair covers one wagon's LH and RH mirror bases; it is not a single side, not a tail light cover, not a headlight garnish, and not a replacement mirror glass / motor / housing assembly.
On a kei wagon used for family and daily runs, the factory side mirror housing is plain black plastic that picks up scuffs, finger marks, parking-lot dings and UV fade that dull the side profile at eye level. Left alone, those marks make the wagon look older than it is and pull down the presentable condition. This chrome-acrylic 2 pc pair adds a thin reflective layer over each housing that dresses the side line and at the same time shields the factory plastic underneath on the LH side, the RH side, or both. For the with-light variant the same shell also carries the LED turn signal, which lifts side visibility to following drivers and to pedestrians at junctions without changing the factory mirror glass or motor.
Clear acrylic (PMMA) base with chrome-plated surface finish for a thin, dress-up look on the side mirror housing.
Custom-molded to the Every DA64W wagon mirror housing shape for a flush, gap-free fit on both LH and RH sides.
Self-adhesive automotive-grade backing for a tool-free install of the chrome-acrylic shell in minutes, no drilling and no mirror removal required.
With-light variant includes a built-in LED light strip and a pigtail wire harness; once connected to the wagon's turn signal circuit the factory mirror gains an integrated turn signal function (no separate turn signal housing swap required).
Without-light variant ships as a plain chrome-acrylic decorative cover with no LED and no wiring, for cosmetic upgrade only.
Two-piece pair (LH + RH) bundled as a complete set, no separate left or right part to order on top.
Exterior trim only, no contact with the mirror glass, the mirror motor, or the side door (with-light variant does connect to the wiring harness but does not touch the mirror glass or motor).
Clean the factory mirror housing surface on both sides. For the without-light shell, peel the adhesive backing and press the chrome-acrylic shell firmly into place over the LH or RH housing; no tools or wiring are needed, and the adhesive holds through regular washing and changing weather. For the with-light shell, peel the adhesive backing, seat the shell over the LH or RH housing so the integrated LED strip aligns with the housing curve, then connect the pigtail wire harness to the wagon's turn signal circuit (typically the front turn signal lead near the A-pillar or the door boot) to activate the turn signal function. No drilling, no mirror glass removal, and no mirror motor swap are required on either variant.
This is a side mirror cover (mirror housing overlay) only, not a tail light cover, not a headlight garnish, not a door mirror replacement, and not a full body trim kit. Confirm your vehicle is a Suzuki Every DA64W (2005-2015 wagon); the pair fits the wagon body only and does not fit the DA64V van. Choose the with-light variant if you want a turn signal upgrade (LED + wire harness included, requires wiring to the wagon's turn signal circuit), or choose the without-light variant if you only want a cosmetic chrome-acrylic dress-up cover (no wiring required). The kit is one combined pair; the LH and RH shells are not sold separately on this SKU.
Product type: Side Mirror Cover (mirror housing overlay)
Fitment: Suzuki Every DA64W, 2005 to 2015
Body coverage: DA64W wagon only (excludes DA64V van)
Variant A (with-light): built-in LED light strip + pigtail wire harness, turn signal upgrade (requires wiring)
Variant B (without-light): plain chrome-acrylic decorative cover, no LED, no wiring (cosmetic only)
Also fits (DA64W-platform rebadges): Mazda Scrum Wagon, Mitsubishi Town Box, Nissan NV100 Clipper, Mitsubishi Minicab
Set contents: 2 chrome-acrylic mirror shells (1 LH + 1 RH per set)
Material: Acrylic (PMMA) base
Surface finish: Chrome-plated (chrome over clear acrylic)
Install method: Tool-free, self-adhesive
Position: Side mirror housing on LH and RH front doors
This is a side mirror cover (mirror housing overlay / mirror cap / wing mirror cover) only, not a tail light cover, not a headlight garnish, not a door mirror replacement assembly, and not a full body trim kit. The product type kebab slug is side-mirror-cover per the URL slug; the main keyword uses natural spacing side mirror cover. The chrome appearance is a surface plating layer on a clear acrylic base, not a solid metal shell, so the cover stays light and installs with adhesive only. The pair fits the DA64W wagon body only and does not fit the DA64V van; verify the chassis code reads DA64W before ordering. The set ships as two product variants on the same SKU code: the with-light variant is a self-contained turn signal upgrade (LED strip + pigtail wire harness; the buyer connects the harness to the wagon turn signal circuit, no separate turn signal housing swap required); the without-light variant is a plain chrome-acrylic decorative cover with no LED and no wiring. Both variants share the same chrome-acrylic shell geometry and the same self-adhesive install base; the with-light variant adds the LED + wire harness on top of the chrome shell. Rebadge fitment covers the DA64W-platform twins (DG64W / DS64W / DR64W chassis codes) and is listed from public model data, pending your confirmation.
Model | Years | Body | Note |
|---|---|---|---|
Suzuki Every DA64W | 2005 to 2015 | Wagon (DA64W only, excludes DA64V van) | Direct fit, wagon chassis code only |
Mazda Scrum Wagon (DG64W) | 2005 to 2015 | Wagon | Rebadge; verify chassis code DG64W before order |
Mitsubishi Town Box (DS64W) | 2005 to 2015 | Wagon | Rebadge; verify chassis code DS64W before order |
Mitsubishi Minicab Wagon (DS64W) | 2005 to 2015 | Wagon | Rebadge; verify chassis code DS64W before order |
Nissan NV100 Clipper (DR64W) | 2005 to 2015 | Wagon | Rebadge; verify chassis code DR64W before order |
This side mirror cover pair is engineered for the Every DA64W wagon body only. The DA64V van uses a different mirror housing geometry and is not covered by this 2 pc pair; for van mirror fitment please refer to the DA64V-specific mirror cover SKU. The pair ships as two product variants: the with-light variant carries a built-in LED strip plus a pigtail wire harness so the buyer can wire it into the wagon's turn signal circuit and gain a turn signal function through the mirror; the without-light variant is a plain chrome-acrylic decorative cover with no LED and no wiring. Both variants install on the same DA64W wagon mirror base without an adapter or trim ring change. Confirm your vehicle body is wagon (not van) and chassis code reads DA64W (Suzuki), DG64W (Mazda), DS64W (Mitsubishi) or DR64W (Nissan) before ordering.
Does this pair fit the Every DA64V van?
No. This 2 pc pair is engineered for the Every DA64W wagon body only. The DA64V van uses a different mirror housing geometry and is not covered by this SKU. For van mirror fitment please refer to the DA64V-specific mirror cover SKU.
Does the pair fit both with-light and without-light mirror bases?
The pair ships as two distinct variants on the same SKU code. The with-light variant is a complete turn signal upgrade shell with a built-in LED light strip and a pigtail wire harness; once the buyer connects the harness to the wagon's turn signal circuit the factory mirror gains an integrated turn signal function. The without-light variant is a plain chrome-acrylic decorative cover with no LED and no wiring, used for cosmetic upgrade only. Both variants install on the same DA64W wagon mirror base without an adapter or trim ring change; choose with-light if you want a turn signal function, without-light if you only want a cosmetic chrome shell.
What is included in the 2 pc set?
One LH mirror shell and one RH mirror shell, both chrome-plated clear acrylic with self-adhesive backing. The set is one combined pair; the LH and RH shells are not sold separately on this SKU.
Do I need to remove the factory mirror to install the covers?
No. Each shell installs over the factory mirror housing with the adhesive backing. The mirror glass, the mirror motor, the turn signal bulb, and the side door are not touched. Clean the housing surface first, peel the backing, and press each shell firmly into place.
Is this a tail light cover, a headlight garnish, or a door mirror replacement?
No. This is a side mirror cover (mirror housing overlay) only. It does not cover the tail light, it is not a headlight garnish or headlight cover, and it is not a replacement door mirror assembly. It dresses the factory mirror housing on the LH and RH sides of the wagon only.
The Hijet and the Gran Max—one is the ultimate space-saving product under Japan's micro commercial vehicle regulations, and the other is a globalized model that broke free from those constraints to reach the pinnacle of practicality. Whether navigating narrow Tokyo alleys or driving across the vast Southeast Asian market, they demonstrate Daihatsu's "compact cars, big impact" philosophy through solid quality and continuous generational inheritance.
Read More