-
- English
 |
Suzuki Every
Universal
100 sets
FOB, CIF
T/T, L/C, Credit Card, Western Union
USD, EUR, HKD
Suzuki Every, Mazda Scrum, Nissan NV100 Clipper, Mitsubishi Minicab Van, Mitsubishi Town Box
2015–Present
Exterior Trim & Accent Covers
headlight cover, headlight garnish, headlight bezel, headlight trim, headlamp cover, lamp cover, headlight protector, headlight frame
| Fitment: | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Placement: | |||||||||
| Style: | |||||||||
| Quantity: | |||||||||
| |||||||||
Table of Contents
The Suzuki Every DA17 headlight garnish is designed for the 2015-Present 6th-generation Every van (DA17V) and wagon (DA17W). The cover set follows the factory headlamp bezel contour and mounts over the halogen headlight housing with pre-applied automotive double-sided tape. It dresses up the front end while shielding the painted headlamp surround from stone chips and minor impacts.
Factory headlamp bezel / surround on halogen-equipped DA17V and DA17W models
Left and right headlight units as a matched pair
Painted front bumper edges immediately adjacent to the headlamp
Chrome-plated ABS: glossy mirror finish, in stock
Matte black ABS: satin finish, available by custom order
Carbon-fiber-look ABS: hydrographic print finish, available by custom order
Transforms the plain black halogen headlamp surround into a premium front-end accent
Cheaper and faster than a full headlamp replacement for fleet refreshes
Matches other chrome or carbon-style exterior trims on dressed-up DA17 builds
Specifications follow the production configuration shown in the source images and confirmed on the product page. Final goods follow the contract agreement and buyer-confirmed production requirements.
Product type: headlight cover / headlight garnish (exterior trim)
Quantity per SKU: 2 pieces (left + right)
Substrate material: ABS plastic
Finish options: chrome-plated (stock), matte black (custom), carbon-fiber-look (custom)
Compatibility: halogen headlamp models only
Profile: follows the factory headlamp bezel contour on DA17V and DA17W
Cutouts: open centre leaves the headlamp lens fully exposed
Edge relief: shaped to clear the bonnet line and bumper seam
Tool-free installation per the source page
Fixing: automotive-grade double-sided tape pre-applied on the rear face
Surface prep: degrease the headlamp surround with isopropyl alcohol (IPA) before mounting
Working temperature: 18-38 °C ambient for proper adhesion
Cure time: 24 hours initial bond, 72 hours full bond before washing
Test fit before removing the liner; repositioning after contact is not possible
Chrome finish: wash with neutral car shampoo and a microfibre cloth; do not paint
Matte black finish: avoid abrasive polishes and waxes that add gloss
Carbon-look finish: clean with pH-neutral shampoo; do not use solvent-based dressings
1 pair (left + right) headlight garnish covers
Pre-applied double-sided tape backing
Fitting instruction sheet
This headlight garnish is listed for the 2015-Present Suzuki Every DA17 platform. It is designed for halogen headlamp vehicles only; LED headlamp models have a different lens/housing shape and are not covered.
2015–Present Suzuki Every DA17 (6th generation)
Van (DA17V) and wagon (DA17W) body styles
Halogen headlamp models only
Left-hand drive and right-hand drive layouts
Mazda Scrum (shared DA17 platform architecture)
Nissan NV100 Clipper / Clipper Rio (2015–2024)
Nissan Clipper Van / Rio (2024–present)
Mitsubishi Minicab Van / Town Box (shared DA17 platform architecture)
Suzuki carried out a major facelift in 2026 and some markets now use DA18 badging; verify the chassis code stamped on the firewall if your vehicle is a 2026 or later model
Confirm your headlamp type before ordering: this garnish is for halogen headlamps only, not LED headlamps
Always compare the supplied garnish against the headlamp surround before removing the tape backing
Does the set include both left and right covers?
Yes. The SKU is a 2-piece set covering the left and right headlight bezels on the Suzuki Every DA17.
Will this fit LED headlamp models?
No. This garnish is designed for halogen headlamp models only. LED headlamp models have a different lens and housing shape, so the bezel contour will not match. Check your headlamp type before ordering.
How is the cover fixed to the headlamp?
The cover mounts with pre-applied automotive double-sided tape on the rear face. Clean the headlamp surround with isopropyl alcohol (IPA), position the garnish, then press firmly. Allow 24 hours for the initial bond and 72 hours before washing.
Can I order matte black or carbon-look if they are not in stock?
Yes. The source page lists chrome as the stocked finish and matte black / carbon-fiber-look as custom-order options. MOQ and lead time for custom finishes will follow the contract agreement.
Will it fit a 2026 or later Suzuki Every?
Suzuki updated the Every with a 2026 facelift and some markets now use DA18 badging. The headlamp surround may be unchanged, but we recommend checking the chassis code and headlamp type before ordering.
Jaecoo is Chery's SUV brand built only for overseas buyers. This piece examines why it was created, how its J5–J8 models carry the "elegant off-road" idea, and what its UK and Southeast Asia sales truly show. It covers the "Temu Range Rover" joke, the SHS hybrid that suits weak charging networks, and a clear-eyed verdict: Jaecoo has proved it can get hot — but not yet that it can stay.
Read More