Product Description
Fitment
The Suzuki Every 5th-gen DA64 brake light cover is designed for the rear upper windshield line of the fifth-generation Every, where the factory high-mount stop lamp sits upon the rear glass. The DA64 spans both the DA64V van and the DA64W wagon bodies of the 5th-gen Every, so this single-piece kit is engineered for the full DA64 range rather than a single body. The cover dresses the factory garnish trim above the 3rd brake light housing without touching the rear glass, the rear wiper, the tailgate, or the rear door.
What Is Included
The 1 piece set ships as a single acrylic strip. The strip is clear acrylic plastic with a chrome-plated surface finish, molded to the shape of the Every DA64 high-mount stop lamp garnish area, and installs with automotive-grade self-adhesive backing. The set covers one garnish position only; it is not a left-and-right pair, not a tail light cover, and not a full rear garnish kit.
Why It Matters
On a kei vehicle used for family and daily runs, the factory 3rd brake light garnish is plain black plastic that picks up scuffs, finger marks and UV fade, and the high-mount stop lamp area stands out at the eye line of every following driver. Left alone, those marks make the rear of the car look older than it is and pull down the presentable condition. This chrome-plated acrylic cover adds a thin reflective layer that dresses the garnish and at the same time shields the factory plastic underneath.
Key Features
Self-adhesive automotive-grade backing for a tool-free install in minutes, no drilling or wiring.
Clear acrylic base with chrome-plated surface finish for a thin, dress-up look on the rear upper windshield line.
Custom-molded to the Every DA64 high-mount stop lamp garnish shape for a flush, gap-free fit.
Exterior trim only, no contact with the rear glass, the rear wiper, or the tailgate.
Single-piece set, one acrylic strip covers the full garnish width in one install.
Installation
Clean the factory garnish surface above the high-mount stop lamp, peel the adhesive backing, and press the strip firmly into place. No tools or wiring are needed, and the adhesive holds through regular washing and changing weather.
Fitment Tip
This is a brake light cover (3rd brake light / high-mount stop lamp garnish trim) only, not a tail light cover, not a headlight garnish, and not a full rear garnish kit. Confirm your vehicle is a Suzuki Every DA64 (2005-2015), which covers both the DA64V van and DA64W wagon. The kit fits the full DA64 platform; verify the chassis code reads DA64 before ordering.
Specifications
Product Data
Product type: Brake Light Cover (3rd brake light / high-mount stop lamp garnish)
Fitment: Suzuki Every DA64, 2005 to 2015
Body coverage: DA64 full platform (DA64V van and DA64W wagon)
Also fits (DA64-platform rebadges): Mazda Scrum, Mitsubishi Minicab / Town Box, Nissan NV100 Clipper
Set contents: 1 acrylic cover strip (1 pc per set)
Material: Acrylic (PMMA) base
Surface finish: Chrome-plated (chrome over clear acrylic)
Install method: Tool-free, self-adhesive
Position: Rear upper windshield line, above the factory high-mount stop lamp
Note
This is a brake light cover (3rd brake light garnish trim) only, not a tail light cover, not a headlight garnish, and not a full rear garnish kit. The product type kebab slug is brake-light-cover per the URL slug; the main keyword uses natural spacing brake light cover. The chrome appearance is a surface plating layer on a clear acrylic base, not a solid metal strip, so the cover stays light and installs with adhesive only. Rebadge fitment covers the DA64-platform twins (DG64 / DS64 / DR64 chassis codes) and is listed from public model data, pending your confirmation.
Vehicle Fitment
Compatible Models
Model | Years | Body | Note |
Suzuki Every DA64 | 2005 to 2015 | Van and Wagon (DA64V + DA64W) | Direct fit (full platform) |
Mazda Scrum (DG64V / DG64W) | 2005 to 2015 | Van and Wagon | |
Mitsubishi Minicab (DS64V) | 2005 to 2015 | Van | |
Mitsubishi Town Box (DS64W) | 2005 to 2015 | Wagon | |
Nissan NV100 Clipper (DR64V / DR64W) | 2005 to 2015 | Van and Wagon | |
Fitment Tip
The DA64 platform spans both the DA64V van and DA64W wagon, so one kit serves every 5th-gen Every body. Verify the chassis code reads DA64 (Suzuki), DG64 (Mazda), DS64 (Mitsubishi) or DR64 (Nissan) before purchase.
FAQ
Where on the car does this cover go?
On the rear upper windshield line, just above the factory high-mount stop lamp (3rd brake light). The strip covers the factory garnish trim on that line, not the tail lights on the rear corners of the body.
Does this kit fit both the van and the wagon?
Yes. This kit is made for the full DA64 platform, which includes both the DA64V van and DA64W wagon of the 5th-generation Every, so it fits either body.
What is included in the 1 piece set?
One chrome-plated acrylic strip, self-adhesive, that covers the full garnish width of the high-mount stop lamp area. The strip is one single piece; it is not sold as a left/right pair on this SKU.
Is this a tail light cover, a headlight garnish, or a full rear garnish kit?
No. This is a brake light cover (3rd brake light / high-mount stop lamp garnish trim) only. It does not cover the tail lights, the headlight area, or any other rear garnish positions, and it is not a glass replacement. The chrome appearance is a plating layer on a clear acrylic base, not a solid metal piece.
How is it installed?
Clean the factory garnish surface above the high-mount stop lamp, peel the adhesive backing, and press the strip into place. No drilling, tools or wiring are required.