Suzuki Every Rear Wiper Arm and Blade | DA64 Fitment (2005-2015)

Suzuki Every DA64 Rear Wiper Arm and Blade Set

The 2005-2015 Suzuki Every DA64 carries a single rear wiper on the tailgate glass, fitted on both the DA64V van and the DA64W wagon. This two-piece assembly replaces that worn arm-and-blade pair in one order, so the rear window clears properly on rainy runs and dusty site roads.

What the 2-Piece Set Includes

• 1 rear wiper arm with a spring-loaded pivot that clamps onto the factory spindle

• 1 rear wiper blade that locks into the arm hook

• No additional hardware required for a standard replacement

Why Replace Arm and Blade Together

• A hardened blade leaves streaks even when the arm is fine, and vice versa

• Arm springs fatigue after years of sun exposure, so the blade presses unevenly on the glass

• Replacing both in one service visit saves a second round of labour

Built for Fleet Duty

• Black plastic housing resists UV fade common in tropical markets

• Spring-tensioned pivot keeps even contact pressure across the blade

• Suits kei vans running daily delivery or passenger routes in hot climates

Specifications

Specifications follow the source page configuration and the product images. Final goods follow the contract agreement and buyer-confirmed production requirements.

Product Overview

• Product type: rear wiper assembly (arm + blade pair)

• Quantity per set: 2 pieces (1 arm + 1 blade)

• Arm material: black plastic with spring steel pivot tension

• Blade: rubber wiping edge with plastic spine

• Colour: black

• Placement: rear tailgate glass (per source page, rear wipers)

Installation Method

• Tool-free clip-on replacement (per source page)

• Remove the old blade from the arm hook by hand

• Unbolt or unclip the old arm from the spindle, depending on the original fitment

• Seat the new arm onto the spindle and clip the new blade into the hook

• Confirm the arm rests at the factory parked angle before closing the tailgate

Service Interval Guidance

• Inspect the rear blade every six months on fleet vehicles in hot, high-UV regions

• Replace the blade when streaking, chattering or visible cracking appears

• Replace the arm if the spring no longer holds the blade flat against the glass

Package Contents

• 1 piece rear wiper arm

• 1 piece rear wiper blade

• Fitting instruction sheet

Vehicle Fitment

One 2-piece set fits the rear wiper position on both body styles of the DA64 generation. Both the DA64V van and the DA64W wagon carry a rear wiper on the tailgate glass, so a single SKU covers the platform.

Confirmed Fitments

• Suzuki Every DA64V (van, 5th gen), 2005-2015 model years

• Suzuki Every DA64W (wagon, 5th gen), 2005-2015 model years

• Both body styles carry the same rear wiper spindle layout on the tailgate

Rebadge Cross-reference (Same DA64 Platform)

• Mazda Scrum DG64V / DG64W, 2005-2015

• Nissan NV100 Clipper DR64V / DR64W, 2005-2015

• Mitsubishi Minicab Van DS64V, 2005-2015 (Japan domestic market primarily)

Not Compatible With

• Suzuki Every DA17V / DA17W (6th gen, 2015-present), R06A engine generation with different rear wiper geometry

• Suzuki Every DA62V / DA62W (4th gen, pre-2005), different tailgate and spindle layout

Fitment Verification Note

• Aftermarket rear blades for this platform are listed in differing lengths by supplier, so buyers should measure the original blade before ordering if the exact length matters

• The clip-on pivot seats onto the factory spindle; no adapter is needed for stock DA64 tailgates

• Rebadged-model buyers should compare the parked arm angle and spindle shape with the product images

Frequently Asked Questions