Product Description
Fitment
This door trim set is custom-molded for the Suzuki Every 5th generation DA64 platform, built from 2005 to 2015. The DA64 spans both the DA64V van and DA64W wagon bodies of the fifth-generation Every, so this kit is engineered for the full DA64 range rather than a single body. The strips sit along the lower panel of each side door, between the door handle and the underside of the door, dressing the car line without touching the window sill or the glass above. The same DA64 platform was also shared by rebadged twins, and the kit fits those variants as well.
What Is Included
The 8 piece set dresses every side door on the Every DA64. Eight stainless steel strips with a mirror chrome finish fit along the lower panel of the four side doors (left and right front, left and right sliding or rear), one strip per door for a continuous trim line around the lower body. Each strip is stainless steel with a mirror chrome finish and is self-adhesive. The kit covers the lower door line only; it is a body trim on the door panel itself, not a window sill trim, not a window visor, and not a door handle cover.
Why It Matters
On a kei vehicle used for family and daily runs, the lower door panel picks up stone chips, scuffs, parking-lot dings and UV fade that dull the side profile. Left alone, those marks bring down the presentable condition and lower trade-in value. This stainless steel trim set adds a molded layer that dresses the lower door line and at the same time shields the factory paint underneath.
Key Features
Self-adhesive automotive-grade tape for a tool-free install in minutes, no drilling.
SUS304-grade stainless steel with a mirror chrome finish that resists rust, corrosion and stone-chip scuffs.
Full side-door coverage: one long strip per door, eight pieces in one set for a continuous lower trim line.
Custom-molded to the Every DA64 lower door panel shape for a flush, gap-free fit.
Exterior trim only, no contact with the window glass, the window sill, or the door handle bowl.
Installation
Clean the lower door panel surfaces, peel the backing, and press each strip firmly into place. No tools or wiring are needed, and the adhesive holds through regular washing and changing weather.
Fitment Tip
This is a door trim (lower side door panel) kit, not a window sill trim, not a window visor, and not a door handle cover. Confirm your vehicle is a Suzuki Every DA64 (2005-2015), which covers both the DA64V van and DA64W wagon. The kit fits the full DA64 platform; verify the chassis code reads DA64 before ordering.
Specifications
Product Data
Product type: Door Trim (lower side door panel)
Fitment: Suzuki Every DA64, 2005 to 2015
Body coverage: DA64 full platform (DA64V van and DA64W wagon)
Also fits (DA64-platform rebadges): Mazda Scrum, Mitsubishi Minicab / Town Box, Nissan NV100 Clipper
Set contents: 8 stainless steel strips (one strip per side door, four doors per vehicle; composition per your package pending your confirmation)
Material: SUS304-grade stainless steel
Finish: Mirror chrome
Install method: Tool-free, self-adhesive
Position: Lower panel of each side door, between the door handle and the underside of the door
Note
This is a door trim (lower side door panel) kit, not a window sill trim, not a window visor, and not a door handle cover. The product type kebab slug is standardized to door-trim (singular) per the industry convention and aligned with the published URL slug; the main keyword uses natural spacing door trim. The 8 piece composition shown on the product page labels this an 8 pc set; the breakdown per your package is one strip per side door for a continuous lower trim line, please reconcile the page label if the actual breakdown differs. Rebadge fitment covers the DA64-platform twins (DG64 / DS64 / DR64 chassis codes) and is listed from public model data, pending your confirmation.
Vehicle Fitment
Compatible Models
Model | Years | Body | Note |
Suzuki Every DA64 | 2005 to 2015 | Van and Wagon (DA64V + DA64W) | Direct fit (full platform) |
Mazda Scrum (DG64V / DG64W) | 2005 to 2015 | Van and Wagon | |
Mitsubishi Minicab (DS64V) | 2005 to 2015 | Van | |
Mitsubishi Town Box (DS64W) | 2005 to 2015 | Wagon | |
Nissan NV100 Clipper (DR64V / DR64W) | 2005 to 2015 | Van and Wagon | |
Fitment Tip
The DA64 platform spans both the DA64V van and DA64W wagon, so one kit serves every 5th-gen Every body. Verify the chassis code reads DA64 (Suzuki), DG64 (Mazda), DS64 (Mitsubishi) or DR64 (Nissan) before purchase.
FAQ
Does this kit cover both the van and the wagon?
Yes. This kit is made for the full DA64 platform, which includes both the DA64V van and DA64W wagon of the 5th-generation Every, so it fits either body.
What is included in the 8 piece set?
Eight stainless steel strips with a mirror chrome finish, one strip per side door, for a continuous lower trim line around the vehicle. The set is one combined kit; the strips are not sold separately on this SKU.
Is this a window sill trim, a window visor, or a door handle cover?
No. This is a door trim (lower side door panel) kit only. It does not cover the window sill, it is not a wind deflector or visor, and it is not a door handle bowl cover. It dresses the lower panel of each side door only.
How is it installed?
Clean the lower door panel surfaces, peel the adhesive backing, and press each strip into place. No drilling, tools or wiring are required.