-
- English
 |
Suzuki Every
Universal
100 sets
FOB, CIF
T/T, L/C, Credit Card, Western Union
USD, EUR, HKD
Suzuki Every, Mazda Scrum, Nissan NV100 Clipper, Mitsubishi Minicab Van
2005-2015
Exterior Trim & Accent Covers
gas tank cover, fuel tank cover, fuel cap cover, fuel filler cover, gas cap guard, gas tank guard, fuel cap protector, fuel filler guard
| Fitment: | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Style: | |||||||||
| Quantity: | |||||||||
| |||||||||
Table of Contents
This gas tank cover is engineered for the 5th-generation Suzuki Every (DA64, 2005-2015). The ABS base carries an electroplated chrome finish, so the part works both as a protective guard over the fuel filler pocket and as a visible exterior accent. It mounts over the factory fuel cap area and shields the surrounding paintwork from key scratches and parking-lot scuffs common on fleet vans.
Paint area immediately above and below the factory fuel cap
The horizontal body seam that runs across the fuel filler pocket
Both the van (DA64V) and wagon (DA64W) body styles with one profile
Matches the chrome door handles and mirror covers already fitted on many DA64 trims
Electroplated surface holds its gloss better than painted plastic in high-UV markets
Delivers a factory-look upgrade without replacing the whole fuel filler panel
The DA64 Every has been out of production for over a decade, so genuine body trim is no longer stocked at dealerships
This aftermarket cover fills the replacement gap for used-car exporters and refurbishment shops
Suits parallel-import resellers serving Southeast Asia and the Middle East
Specifications follow the production configuration shown in the source images and confirmed on the product page. Final goods follow the contract agreement and buyer-confirmed production requirements.
Product type: gas tank cover (fuel cap accent guard)
Quantity per SKU: 1 piece
Substrate material: ABS
Surface finish: electroplated chrome, mirror-bright
Colour: chrome (silver)
Length: covers the full width of the factory fuel cap pocket on DA64V and DA64W
Mounting: two end hooks seat into the factory seam either side of the fuel cap
Two relief cutouts clear the cap hinge and latch mechanism
Tool-free installation per the source page
Fixing: automotive-grade 3M adhesive tape on the rear face
Surface prep: degrease the fuel cap pocket with isopropyl alcohol (IPA) before mounting
Working temperature: 18-38 °C ambient for proper 3M adhesion
Cure time: 24 hours initial bond, 72 hours full bond before washing
1 piece chrome-plated gas tank cover
Pre-applied 3M adhesive backing
Fitting instruction sheet
One SKU covers both body styles of the DA64 generation. Confirm the fuel filler pocket geometry against the lead image before ordering for rebadged models.
Suzuki Every DA64V (van, 5th gen), 2005-2015 model years
Suzuki Every DA64W (wagon, 5th gen), 2005-2015 model years
Mazda Scrum DG64V / DG64W, 2005-2015
Nissan NV100 Clipper DR64V / DR64W, 2005-2015
Mitsubishi Minicab Van DS64V, 2005-2015 (Japan domestic market primarily)
Suzuki Every DA17V / DA17W (6th gen, 2015-present), different fuel cap pocket geometry
Suzuki Every DA62V / DA62W (4th gen, pre-2005), different fuel cap position
The DA64 Every was sold new in Japan and widely parallel-exported to right-hand-drive markets
Active refurbishment demand comes from Indonesia, Pakistan, the Philippines, Kenya and Tanzania
Kei-class vans run as commercial fleet vehicles in these markets, so exterior trim wear is high
Does one part fit both van and wagon?
Yes. The gas tank cover is built on a single profile that mounts to both the DA64V (van) and DA64W (wagon) fuel filler pockets.
Can the chrome cover be painted to match the body colour?
Not recommended. Electroplated chrome has very low paint adhesion, and paint applied directly over it will peel. For a body-colour finish, order the unpainted ABS version and have it painted before installation.
How should the chrome surface be cleaned?
Use a pH-neutral car shampoo and a soft microfibre cloth. Avoid abrasive compounds and acidic wheel cleaners, which will haze the electroplated layer over time.
Will the 3M tape hold on a freshly repainted panel?
Allow fresh paint and clear coat to fully cure (typically 30 days for two-pack urethane) before mounting. Tape applied to uncured paint can lift the clear coat.
Can the cover be removed later without damaging the paint?
Warm the adhesive with a hairdryer or low-heat gun, then peel slowly parallel to the panel. Residual adhesive can be removed with a dedicated 3M adhesive remover or isopropyl alcohol.
Jaecoo is Chery's SUV brand built only for overseas buyers. This piece examines why it was created, how its J5–J8 models carry the "elegant off-road" idea, and what its UK and Southeast Asia sales truly show. It covers the "Temu Range Rover" joke, the SHS hybrid that suits weak charging networks, and a clear-eyed verdict: Jaecoo has proved it can get hot — but not yet that it can stay.
Read More