-
- English
 |
Suzuki Every
Universal
100 sets
FOB, CIF
T/T, L/C, Credit Card, Western Union
USD, EUR, HKD
Suzuki Every, Mazda Scrum, Nissan NV100 Clipper, Mitsubishi Minicab Van
2005-2015
Wipe Assy
rear wiper assy, rear wiper assembly, rear wiper arm and blade, rear wiper set, back glass wiper, tailgate wiper blade, rear windshield wiper, wiper arm with blade
| Fitment: | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Type: | |||||||||
| Placement: | |||||||||
| Quantity: | |||||||||
| |||||||||
Table of Contents
The 2005-2015 Suzuki Every DA64 carries a single rear wiper on the tailgate glass, fitted on both the DA64V van and the DA64W wagon. This two-piece assembly replaces that worn arm-and-blade pair in one order, so the rear window clears properly on rainy runs and dusty site roads.
1 rear wiper arm with a spring-loaded pivot that clamps onto the factory spindle
1 rear wiper blade that locks into the arm hook
No additional hardware required for a standard replacement
A hardened blade leaves streaks even when the arm is fine, and vice versa
Arm springs fatigue after years of sun exposure, so the blade presses unevenly on the glass
Replacing both in one service visit saves a second round of labour
Black plastic housing resists UV fade common in tropical markets
Spring-tensioned pivot keeps even contact pressure across the blade
Suits kei vans running daily delivery or passenger routes in hot climates
Specifications follow the source page configuration and the product images. Final goods follow the contract agreement and buyer-confirmed production requirements.
Product type: rear wiper assembly (arm + blade pair)
Quantity per set: 2 pieces (1 arm + 1 blade)
Arm material: black plastic with spring steel pivot tension
Blade: rubber wiping edge with plastic spine
Colour: black
Placement: rear tailgate glass (per source page, rear wipers)
Tool-free clip-on replacement (per source page)
Remove the old blade from the arm hook by hand
Unbolt or unclip the old arm from the spindle, depending on the original fitment
Seat the new arm onto the spindle and clip the new blade into the hook
Confirm the arm rests at the factory parked angle before closing the tailgate
Inspect the rear blade every six months on fleet vehicles in hot, high-UV regions
Replace the blade when streaking, chattering or visible cracking appears
Replace the arm if the spring no longer holds the blade flat against the glass
1 piece rear wiper arm
1 piece rear wiper blade
Fitting instruction sheet
One 2-piece set fits the rear wiper position on both body styles of the DA64 generation. Both the DA64V van and the DA64W wagon carry a rear wiper on the tailgate glass, so a single SKU covers the platform.
Suzuki Every DA64V (van, 5th gen), 2005-2015 model years
Suzuki Every DA64W (wagon, 5th gen), 2005-2015 model years
Both body styles carry the same rear wiper spindle layout on the tailgate
Mazda Scrum DG64V / DG64W, 2005-2015
Nissan NV100 Clipper DR64V / DR64W, 2005-2015
Mitsubishi Minicab Van DS64V, 2005-2015 (Japan domestic market primarily)
Suzuki Every DA17V / DA17W (6th gen, 2015-present), R06A engine generation with different rear wiper geometry
Suzuki Every DA62V / DA62W (4th gen, pre-2005), different tailgate and spindle layout
Aftermarket rear blades for this platform are listed in differing lengths by supplier, so buyers should measure the original blade before ordering if the exact length matters
The clip-on pivot seats onto the factory spindle; no adapter is needed for stock DA64 tailgates
Rebadged-model buyers should compare the parked arm angle and spindle shape with the product images
Does one set fit both the van and the wagon?
Yes. Both the DA64V van and the DA64W wagon carry a rear wiper on the tailgate glass with the same spindle layout, so one 2-piece set covers the whole DA64 platform.
Is this the arm and the blade together, or separate parts?
Together. Each set includes 1 rear wiper arm and 1 rear wiper blade, which is the complete replaceable assembly behind the tailgate glass.
Do I need tools to install it?
No for the blade, which clips into the arm hook by hand. The arm swap needs a basic socket or spanner to release it from the spindle, depending on your original fitment. The full swap takes minutes.
How often should the rear wiper blade be replaced?
On fleet vehicles in hot, high-UV regions, inspect the blade every six months and replace it when streaking or cracking appears. Sun exposure hardens the rubber edge faster than mileage does.
Will this set fit the newer DA17 Every?
No. The DA17 generation (2015-present, R06A engine) uses a different rear wiper geometry and spindle layout. This set covers the DA64 generation only.
The Hijet and the Gran Max—one is the ultimate space-saving product under Japan's micro commercial vehicle regulations, and the other is a globalized model that broke free from those constraints to reach the pinnacle of practicality. Whether navigating narrow Tokyo alleys or driving across the vast Southeast Asian market, they demonstrate Daihatsu's "compact cars, big impact" philosophy through solid quality and continuous generational inheritance.
Read More