Suzuki Every DA17 Door Bowl Sticker (2015-Present) | Carbon-Look 6-Piece Set

2015-Present Suzuki Every DA17 Carbon-Look Door Bowl Sticker Set

Fleet drivers touch the door handle bowl more often than any other painted panel, and the DA17 Every spends its life in exactly that kind of high-frequency service. This 6-piece sticker set covers all four exterior handle bowls with a carbon-fibre texture surface, adding a sporty accent while the paint underneath stays untouched.

What the Six Pieces Cover

• One bowl sticker for the driver door handle recess

• One bowl sticker for the front passenger door handle recess

• Two stickers per sliding cargo door, combined around the handle recess (two sliding doors, four pieces in total)

• Total 6 pieces, covering all four exterior handle bowls on the DA17

Why Two Pieces on the Sliding Doors

• The sliding-door bowl is wider and deeper than the front-door bowl, so a single flat sticker cannot follow the contour

• Two die-cut pieces combine to wrap the recess on either side of the handle opening

• The joint line sits away from the handle travel area, so daily operation never lifts the edge

Carbon Texture That Works Hard

• The carbon-fibre pattern hides the fine scratches that already exist around the bowl

• Dark tone matches white, silver and grey van bodies common in fleet service

• Textured surface wipes clean with neutral shampoo after dusty runs

Aftermarket Supply Note

• The DA17 Every has been on sale since 2015, and used units circulate widely across export markets

• Bowl-scuff refurbishment is a low-cost, high-visibility job, which makes this set a repeat-purchase accessory

• Suits parallel-import resellers and fleet workshops stocking Suzuki Every DA17 consumables

Specifications

Specifications follow the production configuration shown in the source images and confirmed on the product page. Final goods follow the contract agreement and buyer-confirmed production requirements.

Product Overview

• Product type: door bowl sticker set (door handle bowl protective overlays)

• Quantity per SKU: 6 pieces (2 front door bowls x 1, 2 sliding-door bowls x 2 combined)

• Surface finish: carbon-fibre texture (per source page Style field)

• Colour: black carbon pattern

• Mounting: pre-applied automotive double-sided tape

Set Composition

• Front doors: 1 die-cut piece each, following the front bowl outline with a handle opening

• Sliding cargo doors: 2 combined pieces each, wrapping the deeper recess on both sides of the handle

• Piece contours are cut per DA17 bowl geometry, no trimming required

Installation Method

• Tool-free installation with the pre-applied double-sided tape

• Surface prep: degrease the bowl area with isopropyl alcohol (IPA) and let it dry fully

• Working temperature: 18-38 °C ambient for proper adhesion; warm the tape with a hair dryer in cold weather

• Press each piece firmly for 1-2 minutes, working from the centre outward to push out air

• Cure time: 24 hours initial bond, 72 hours full bond before washing

Care Instructions

• Wash with neutral car shampoo and a microfibre cloth only

• Avoid abrasive polishes and stiff-brush automatic washes over the textured face

• Keep high-pressure washer nozzles at a distance from the piece edges

• Removal: warm gently with a hair dryer, peel slowly, wipe residue with IPA

Package Contents

• 6 pieces door bowl stickers (2 front + 2 sliding-door pairs)

• Pre-applied double-sided tape on every piece

• Fitting instruction sheet with piece-position diagram

Vehicle Fitment

This door bowl sticker set is listed for the 2015-Present Suzuki Every DA17 platform. The SKU fits both van (DA17V) and wagon (DA17W) body styles. The piece count assumes the standard four-bowl body layout, so check the notes below before ordering.

Platform Coverage

• Suzuki Every / Every Wagon DA17, 2015-Present (6th generation)

• Covers two front door bowls plus both sliding-door bowls

• Not applicable to the rear tailgate, which has no handle bowl

Rebadge Cross-reference

• Mazda Scrum (shared DA17 platform architecture)

• Nissan NV100 Clipper / Clipper Rio (2015-2024)

• Nissan Clipper Van / Rio (2024-present)

• Mitsubishi Minicab Van / Town Box (shared DA17 platform architecture)

Cross-Check Notes

• Set layout follows the standard four-bowl body: two front doors plus twin sliding doors; if your market variant differs in door layout, compare the pieces against your bowls first

• The source page Style field reads Carbon Fiber and the SKU code suffix CF marks the carbon-look version; colourway requests outside this finish are handled as separate production orders

• Suzuki carried out a 2026 facelift and some markets now use DA18 badging; bowl shapes are likely unchanged, but verify the chassis code on the firewall if your vehicle is a 2026 or later model

• Always dry-fit each piece against the bowl before removing the tape backing; contour tolerance can vary between production batches

Frequently Asked Questions