Table of Contents
Suzuki Every DA64 owners looking to sharpen the front end will find this one-piece grill cover a fast route: a nickel-chrome plated shell that overlays the factory grille bar and turns a plain working van into a dressed-up kei van. No grille removal, no painting, no drilling.
Plain version: the nickel-chrome shell alone, for a clean chrome bar look
With-LED version: the same shell with an illuminated accent, showing amber, white and blue
Both versions share the same DA64 contour and the same tape-on fitting
The cover sits over the original grille, so the stock panel stays intact underneath
It also covers faded or scuffed factory grille surfaces, a common age point on high-mileage Every vans
Removal is possible with gentle heat, returning to the stock look without damage
The plated shell is not designed for repainting: paint does not key well to the plated surface
Clean with neutral car shampoo and a microfiber cloth; avoid abrasive polishes and acidic cleaners
One cover per set, shaped for the DA64 grille bar. The shell is a plated nickel-chrome finish over a molded base, and the with-LED version adds an illuminated accent as listed below.
Construction: molded shell with a nickel-chrome plated finish (listed as Nical Shell)
Surface: mirror-bright plated face, contoured to the DA64 grille bar profile
Quantity: 1 pc per set, covering the front grille bar
Pre-applied automotive-grade double-sided tape on the rear face
Bonds to the clean, dry original grille surface without drilling
Low temperatures: warm the tape with a heat gun or hair dryer before fitting
Keep dry for 24-48 hours after fitting while the adhesive cures
Illuminated accent showing three colours: amber, white and blue
12V electrical system, hard-wired to the vehicle power supply per the supplied instruction sheet
Wiring needs a routed path from the grille area into the engine compartment; confirm the exact control method at quotation
This grill cover is listed for 2005-2015 Suzuki Every (DA64), the fifth-generation kei platform in both van and wagon body styles. One cover fits one vehicle.
2005-2015 Suzuki Every van (DA64V) and wagon (DA64W)
One piece per vehicle, overlaying the stock grille bar
Suits both the plain and with-LED versions of this listing
Kei vans of this era went through minor front-end revisions, so grille bar profiles can vary by year and market
Compare your grille bar against the product photos before ordering
Send a photo of your front end with the chassis code for a fitment check if in doubt
The DA64 body family also appears under badge-engineered names: Mazda Scrum Van, Nissan NV100 Clipper and Mitsubishi Minicab Van
Overlay fitment on those nameplates has not been verified from public sources, so confirm by grille photos before ordering for a rebadged van
Is tape-on fitting really secure for a front grille part?
Yes, when fitted correctly. Automotive-grade double-sided tape is the industry-standard attachment for grille overlays: it holds against highway airflow and car washes. The three points that decide the bond are a clean surface, firm pressure for one to two minutes at fitting, and keeping the van dry for 24 to 48 hours while the adhesive cures.
How is the cover actually fitted on the van?
Clean the grille bar surface (rubbing alcohol works best), warm the tape if the weather is cold, dry-fit the cover for alignment, then peel the backing and press it home along the full length, working the edges. Working from the engine-bay side with the bonnet open makes alignment easier on the Every.
What colours does the LED version show?
The with-LED version displays three colours: amber, white and blue. The plain version has no lighting at all. Ask for the current LED specification sheet at quotation for brightness and control details.
How does the LED version wire in?
It runs on the vehicle 12V system and is hard-wired per the instruction sheet, with the wire routed from the grille area into the engine compartment. Fleets normally have an auto electrician do the connection; the fitting itself remains tape-on.
Can I paint the cover to match my van?
Not recommended. The nickel-chrome plated surface takes paint poorly and the plating can lift. If you need a paintable cover, ask about an unplainted version at quotation.
Will the tape damage the original grille or paint?
No. The tape is designed for vehicle exteriors and removes with gentle heat from a hair dryer, leaving the stock panel underneath untouched.
Does one set fit both the Every van and wagon?
Yes, both DA64V and DA64W share the same grille bar contour for this overlay, covering the 2005-2015 range. Year-to-year front-end revisions are minor, but comparing your grille with the product photos is still the safest check.
Jaecoo is Chery's SUV brand built only for overseas buyers. This piece examines why it was created, how its J5–J8 models carry the "elegant off-road" idea, and what its UK and Southeast Asia sales truly show. It covers the "Temu Range Rover" joke, the SHS hybrid that suits weak charging networks, and a clear-eyed verdict: Jaecoo has proved it can get hot — but not yet that it can stay.