Suzuki Every
Universal
100 sets
FOB, CIF
T/T, L/C, Credit Card, Western Union
USD, EUR, HKD
Suzuki Every, Mazda Scrum, Nissan NV100 Clipper, Mitsubishi Minicab Van, Mitsubishi Town Box
2015–Present
Spoiler
roof spoiler, roof wing, rear roof spoiler, tailgate roof spoiler, roof lip spoiler, roof light bar spoiler, high mount brake lamp spoiler, rear roof wing
| Fitment: | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Placement: | |||||||||
| Color: | |||||||||
| SKU: | |||||||||
| Availability: | |||||||||
| Quantity: | |||||||||
| |||||||||
Table of Contents
This roof spoiler dresses the top rear edge of the Suzuki Every DA17 and carries an integrated LED high-mount brake lamp, so the rear of the van reads as a deliberate design rather than a cut-off roof. It is made for the raised high-roof body, which is the version most DA17 vans and wagons are sold in, and it is supplied as one complete piece with the lamp and its wiring already fitted.
Unpainted: the standard version supplied for repair, respray and upgrade work
Matte black: a low-gloss surface that stays quiet under sunlight and shows less finger marking
Glossy black: a deep high-gloss finish that mirrors the glass and the black exterior trim
Glossy white: a bright high-gloss finish for light body colours
Please state your colour choice in the order, the unpainted version is the default on this product
Matte black spreads the light across the surface and holds a flat, even tone
Glossy black reflects the sky, the garage ceiling and the vehicles behind, so the shape of the spoiler reads more strongly
Matte black hides fine dust and light scratches better, glossy black shows both but stays brighter when washed
Both black options match the black grille, mirror covers and headlight garnish sold for the same platform
Made for the raised roof of the DA17 high-roof vans and wagons
The DA17 GA grade with the lower standard roof does not take this spoiler
Check the roof line of your own vehicle before ordering, the profile differs between the two roof heights
The high-mount brake lamp sits in the spoiler and is wired in at the original lamp position
Fitting a spoiler to a vehicle that already carries a high-mount lamp means the original lamp has to be moved or replaced
Wire routing and lamp type are confirmed against the production sample before shipment
The Every DA17 has been in production since 2015, and genuine roof spoiler supply for the high-roof body is limited
The unpainted version suits repair shops replacing a damaged original panel and matching it to the vehicle colour
Suits body shops, fleet refurbishers and parallel-import resellers
Specifications follow the production configuration shown in the source images and confirmed on the product page. Final goods follow the contract agreement and buyer-confirmed production requirements.
Product type: roof spoiler with integrated LED high-mount brake lamp
Quantity per SKU: 1 piece
Fitment: Suzuki Every DA17, 2015-Present, high roof body only
Colour options: Unpainted, Matte Black, Glossy Black, Glossy White
Default colour on this product: Unpainted
Position: top rear edge of the roof
Unpainted: bare moulded body supplied for painting or colour matching before fitting
Matte Black: low-gloss finish with an even, non-reflective tone
Glossy Black: high-gloss finish with a deep mirror-like reflection
Glossy White: high-gloss bright white finish
Paint the unpainted version before installation, not after it is fitted
Main fixing: bolt-on through the factory mounting holes at the rear roof edge
Secondary fixing: automotive-grade double-sided tape as an anti-lift assist along the joint
Surface prep: clean the roof edge with isopropyl alcohol (IPA) before fixing
Working temperature: 18-38 °C ambient for proper bonding; warm the tape gently in cold weather
Cure time: 24 hours initial bond, 72 hours full bond before washing
LED high-mount brake lamp integrated in the spoiler
Wiring pigtail supplied with the piece
Lamp type, wire length and connector are confirmed against the production sample before shipment
Electrical connection is made at the vehicle side by a qualified installer
1 piece roof spoiler with LED high-mount brake lamp fitted
Fixing hardware kit
Fitting instruction sheet with lamp wiring diagram
This roof spoiler is listed for the 2015-Present Suzuki Every DA17, and only for the raised high-roof body. The sixth-generation Every was sold in both a lower standard roof and a higher roof, and the spoiler profile is cut for the higher one, so roof height has to be confirmed before the order is placed.
2015-Present Suzuki Every DA17 high-roof van (DA17V), chassis code HBD-DA17V or EBD-DA17V
2015-Present Suzuki Every high-roof wagon (DA17W)
Roof height of the high-roof DA17 van is around 1,895 mm and the high-roof wagon around 1,910 mm
Left-hand drive and right-hand drive layouts
Suzuki Every DA17 GA grade with the lower standard roof, approximately 1,815 to 1,830 mm tall
Suzuki Every DA64 (2005-2015) and earlier generations, different roof edge profile
Any vehicle without factory mounting holes at the top rear roof edge
Mazda Scrum (shared DA17 platform architecture)
Nissan NV100 Clipper (DA17 platform rebadge)
Mitsubishi Minicab Van and Mitsubishi Town Box (DA17 platform rebadges)
Confirm the roof height and the rear roof line against your own vehicle before ordering, this spoiler does not suit the lower standard-roof body
The DA17 already carries a high-mount stop lamp, so the original lamp has to be moved, replaced or removed when the spoiler is fitted
Fitting the spoiler raises the overall vehicle height, so check garage and car park height limits before installation
After fitting, check three things: the high-mount lamp is lit correctly, the tailgate wiper sweeps its full travel without hitting the spoiler, and the tailgate opens fully without fouling the piece
Suzuki carried out a major facelift in 2026 and some markets now use DA18 badging; verify the chassis code stamped on the firewall if your vehicle is a 2026 or later model
Does this spoiler fit the standard-roof Suzuki Every DA17?
No. This spoiler is made for the high-roof body only. The DA17 was sold with a lower standard roof on the GA grade and a raised roof on the PA, PC, JOIN and limited grades, and the spoiler profile follows the raised roof line. Please check the roof of your own vehicle before ordering.
Which colour should I order?
Four finishes are available: unpainted, matte black, glossy black and glossy white. The unpainted version is the default on this product and is supplied for repair and upgrade work, where the piece is painted to match the vehicle. Matte black stays flat and shows less dust, glossy black reflects its surroundings and reads brighter, and glossy white is a bright high-gloss option. Please state your colour choice with the order.
What is the difference between matte black and glossy black?
They are the same colour in two different surface finishes. Matte black spreads light across the surface and keeps an even, quiet tone, which hides fine dust and light scratches. Glossy black reflects the sky and nearby objects, which makes the shape of the spoiler more obvious and the colour look deeper when washed. Neither finish is a different colour tone.
Does the spoiler come with a brake light?
Yes. The LED high-mount brake lamp is integrated in the spoiler and the wiring pigtail is supplied with the piece. Since the DA17 already has a high-mount stop lamp at the roof edge, the original lamp has to be moved, replaced or removed during fitting. The lamp type and the connector are confirmed against the production sample before shipment, and the connection should be done by a qualified installer.
Can I paint the unpainted version after fitting it?
No. Paint or colour-match the unpainted piece before it goes on the vehicle. Painting after fitting means masking around the fitted edges and the lamp, and a touch-up on the vehicle rarely matches a piece sprayed separately.
Will it fit a 2026 or later Suzuki Every?
Suzuki updated the Every with a 2026 facelift and some markets now use DA18 badging. The roof edge is likely unchanged, but we recommend checking the chassis code stamped on the firewall or the vehicle registration before ordering, and confirming the rear roof profile against the product photos.
Auto parts are essential components for the proper functioning of vehicles used in car assembly lines or for maintenance and repair services after purchase. Autobridge™ (Xiamen) provides a wide range of OES, aftermarket replacement parts, including AC compressors, cylinder heads, oil pumps, power steering pumps, starter motors, and turbochargers. These components are installed in powertrains, steering systems, rear axle assemblies, and chassis assemblies. Auto parts need to meet the design specifications and performance requirements of the original equipment manufacturer (OEM) parts, as well as comply with local regulations or CAPA certification. Depending on the requirements based on OEMs (Original Equipment Manufacturers) for material or design improvements, aftermarket parts may outperform the original genuine parts.
Car accessories are AFTERMARKET MODIFIED PARTS for cars after the production line. Autobridge™ (Xiamen) offers a variety of accessories, including an airflow snorkel, bumper, door visors, matting, spoiler, and trunk tray. The car accessories are not performance parts and generally do not affect the original power and safety. They are used to modify the appearance style, enhance off-road capabilities, or increase driving comfort. Compared to the genuine accessories, we offer customization services for aftermarket replacement accessories that cater to the buyer's specific requirements. Each accessory can be designed specifically for different car models.
Jaecoo is Chery's SUV brand built only for overseas buyers. This piece examines why it was created, how its J5–J8 models carry the "elegant off-road" idea, and what its UK and Southeast Asia sales truly show. It covers the "Temu Range Rover" joke, the SHS hybrid that suits weak charging networks, and a clear-eyed verdict: Jaecoo has proved it can get hot — but not yet that it can stay.
Read More
